Question about Sony KP-53V75 53" Rear Projection Television

No audio My audio just quit one day about two years ago.It doesn`t work from the front of the TV or the remote.I hooked an outside receiver to the TV speakers and they work fine but I am letting my 80 year old parents use the TV and I want it back the way it was so they don`t have to deal with two remotes.Any ideas?It also seems as so called TV repair men won`t work on a TV that is of 1998 vintage,what a joke.

1 Answer

Mike Longo

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.
Expert
398 Answers

9 times out of 10 a TV like that which has no audio is fine and the audio settings are not right or it is a cable box / satellite receiver problem. If you are using cable then connect the cable directly to the TV, tune in an active channel and set the volume about half way. If you do not hear any sound then, using the remote, go into the menu, scroll to the audio page and make sure the speakers are not set to OFF and also make sure the audio is not set to SAP. If you have checked all that and everything is set correctly and you still have no audio, then your audio output IC is probably bad or cracked and should be resoldered or replaced by a qualified tech.

Posted on Jul 31, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

DENON AVR-1912 PS3 ISSUE

You might just have a handshaking issue between your PS3 and your receiver. See if there are any firmware upgrades for your PS3, Receiver or both. This usually takes care of the problem. If not - your receiver has a 2 or 3 year MFG Warranty. Have it checked out or exchanged.

May 02, 2012 | Denon AVR1912

1 Answer

No sound to the speakers. 10 yrs old, been unplugged for a year, set it up two nights ago, no problem, did speaker test, did set up, no problems, loving life then the next day: nothing. Power is working,...

check for bad solder connection on bottom of the main board near front center of unit

Mar 31, 2010 | Onkyo TX-DS575 Receiver

1 Answer

Video Issue with Onkyo 606 when trying to watch Cable TV.

When this happens and you just see the input label try to press the power button on the front of the cable box and see if it brings the picture up. If this does produce the picture then it is a good possibility that something is interfering with the remote communicating with the cable box. I don't know if you have it contained in an entertainment center or how you have placed your equipment but if there is glass try to clean it and also wipe down the front of the cable box and make sure there is an unobstructed view of the front of the cable box.
Good Luck.

Dec 09, 2009 | Onkyo TX-SR606 Receiver

1 Answer

No sound

Sometimess it is the dish receiver have you tried rebooting the dish receiver, hold down the power button on the dish receiver until the picture goes away then turn the button aloose then don't mess with it until the receiver reboots, then see if your audio returns.

Sep 03, 2009 | Dynex 32 in. LCD Flat-Panel HDTV

3 Answers

Att uverse receiver hooked up to sharp aquos tv, remote quits

first try new batteries and be sure you have pressed the AT&T mode button at the top left of the remote - if you still have issues then on the sharp tv menu - turn off any energy saver mode, Optical Picture Control, taking the picture mode from dynamic or vivid to standard, and if that doesn't work - try changing the backlight settings if your tv has one.

Aug 23, 2009 | Denon AVR-1908

1 Answer

Denon avr-1907 sound from TV stopped working

Help with hooking PS3 to a Denon Receiver. It worked before, but I had to move everything to a different location and when I hooked it back up the PS3 has sound but no picture. I have it hooked directly to the receiver with and HDMI cable (the receiver is hooked up to our cable box which is directly hooked to the tv via HDMI cable).

Jan 03, 2009 | Denon AVR-1907 Receiver

1 Answer

The OSD on my Harman/Kardon 347 does not show up anymore. I am using a Compostie cable and it just stopped working a while ago. I had hooked up an X-Box 360 to my T.V using the 3 RED, GREEN, BLUE component...

Put the receiver in stand by mode (amber light) and hold on the tone button for 8 seconds. This will reset the receiver. After it says reset, let go of the tone button and wait about 30 seconds. Then hit OSD and you should be good to go.

Jul 22, 2008 | Audio Players & Recorders

1 Answer

I have a treasured aiwa stereo system. purchased 25 years ago and worked every day. moved from Vanc to Toronto last week. had it shipped and when unpacked worked wonderfully. now the remote will not...

batteries?

May 15, 2017 | Aiwa Audio Players & Recorders

1 Answer

Remote signal not received?

If u can get to the INSIDE front, clean the window of the receiver eye.(of cause the outside also!) If the wires going to the board can be unpluged, unplug, the push it back in. Possable that the receiver eye circuit is too heated up.Put a small (square boxed computer type fan) in the back of the tv to cool it down some.If u know how to "glue" a HEATSINK to the chip to get rid of the heat, may help.
note: it is possable that BOTH regulor and universal r/c are intermittance (sometimes works, sometimes don't work)

Jan 13, 2008 | Symphonic SC319C 19 in. TV/VCR Combo

1 Answer