I can not figure out how to change the e different key options

After connecting the cable press the Windows key and the P key at the same time. The projector options will appear. Change from projector only to the desired configuration.

okay going to have a bash at solving this but it's a little hard based on your description. I'm guessing this has Mavricks operating system installed.

1. Choose Apple menu > System Preferences, click Dictation & Speech, then click Text to Speech.
3. Select the "Speak selected text when the key is pressed" checkbox. By default, speaking is enabled when you press Option-Esc. To choose a different key, click Change Key, press one or more modifier keys (Command, Shift, Option, or Control) together with another key, then click OK.
4. 
   
5. To have your Mac start speaking, press the specified key. To stop the speaking, press the key again. If text is selected when you press the key, the selected text is spoken. Otherwise, available text items in the current window are spoken; for example, if Mail is the current window, an email message is read. If no text items are available, you hear a beep.
   So based on what you have described you have already found this option and set the change key to "command" + "e"
   Try rebooting then going to the text to speech option and attempt to set the key combination you want it to be. If this fails to change then try resetting the P-ram which should set it back to the default.
   
   

OS Mavericks Reset your computers PRAM

You can change the address on the receipt header by going into the Setup menu. The options will be different based on who your credit card processor is. Different companies use different programs. However, the basic menu structure is pretty similar. Go into the "Merchant" option and hit F2 for Next until you see the Header Line 2 value. Press F3 to Edit. Type the new address, using the ALPHA key to make letters. Space is 0 alpha alpha. When completed, press the green Enter key. Do the same for Header Line 3. Press F4 to exit. It will ask you if you want to save changes, choose "OK." Press the red X key until you get back to the main screen.

NOTE: Changing what prints on the receipt header will not change the information on your merchant account. You still need to call the merchant services provider and provide them with your new address.

There should be a button near the top left side area on the front of the printer that says "auto" and/or has a little red light next to it. When the light is on the printer will auto answer. Push the button until there is no light on and this should turn off auto answering.

There are a few models that do not have this button, but they still have the option on whether to automatically answer or not. It is just accessed a different way.

If you find you have a machine without an auto answer button and wish to turn this service on and/or off, press the "menu" key on your printers keyboard and use the arrows to scroll through the options available. When you the "basic fax setup" press the "enter" or "ok" key on the keyboard. Then continue using the arrow keys to scroll the options until you find the "auto answer" on or off feature and again press the "enter" or "ok" key to change it.

Some machines have two fax setup catagories. If you cannot find the auto answer key in this area, scroll with the arrow keys to find the second one and try there. I have found that some say "basic fax setup" and have another catagory on "advanced fax setup" ect.

Hi,

Take the following steps to change your language to English. 1. Turn your cell phone on, and press the menu button to begin viewing the menu options of your phone. 2. Scroll through the menu options of your phone until you come to a settings option. Every cell phone has a different basic set up, but they all have "settings" areas, where the basic phone settings are located. One you have found the settings option,select it. The settings option will open a list of basic cell phone functions.Some cell phones have larger groups that are then broken further into smaller ones, and other phones have a bunch of small individual settings options. 3. Look for the option under settings that says system, display, display info, or language, and choose it.Whichever of these options your cell phone has, the outcome will be the same,so don't be discouraged if your cell phone has a slightly different set up than other cell phones. 4. Choose your desired cell phone language from the list and choose it, if your cell phone had a language option directly under settings. If not, then look for the language option under the system,display, or display/info options, and then choose your language from the list it provides 5. Turn your phone off and then back on again, just to ensure that the new language change did take effect, and will remain. Your language settings should now be changed, and you should be viewing all functions of your cell phone in your newly chosen language.

OR BETTER STILL

YOU Switch-off your phone.

1. Press and hold 3 keys; Green dial key, * Star key, no. 3 key on keypad and then press the power on/off to switch on the phone.

Remember, do not let go the 3 press and hold keys until you see a formatting word screen show!


2. After a few minutes when the Full phone formatting completed, your phone will back to original system and factory setting.

I HOPE THIS HELPS?

I found this on the internet try it it MAY work.

Start with the key out of the ignition. Open the driver door (all other doors are closed). Driver door is unlocked (other doors don’t matter).


Perform these steps within 5 seconds
Insert the key into the ignition (don’t turn it)
Insert the key into the ignition (don’t turn it)


Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition (don’t turn it) and pull it out.


Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition and leave in the ignition.
Close the drivers door
Turn the ignition to ON (as far as you can go without cranking the engine), then back to off .
Remove the key from the ignition.


Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.


Perform these steps within 40 seconds
Press the lock and unlock buttons on the transmitter simultaneously for 1.5 seconds
Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted.


Open drivers door

hold down "code" key and press 6 for 10 pitch. "code" key and press 7 for 12 pitch. "code" key and press 8 for 15 pitch. to change type size or style you have to replace the daisy wheel.

Your keyboard setting in Control panel regional and language options is probably set to US International.
This option allow you to create every special character using combined keys see this page for MS instruction>
If you have a localized keybord (Portuguise, Brazilian or else) you can get the symbol corresponding with keys if you configure the exact keyboard instead of US international.
Of course for same language you can configure multiple keybord.
You can also use for every language the On screen Keyboard you get in Start/program/accessories/ accessibility

To change the vibrate function:Go to main menu, phone settings, phone profiles, highlight the 'normal' one & press the 'options' soft key to the left of the touch screen keypad. Pick 'edit', then the 'call alert type' will be highlighted. Press the left soft key saying 'options' & select 'change'. You can then opt for it to vibrate by highlighting the vibration one & pressing the tick on the touch screen bit. Then don't forget to save the changes! 
To Change the ringtone:

1. From the standby screen, press Menu (Figure 1).
2. In the main Menu, press Settings (Figure 2).
3. In the Settings menu, select Phone profiles and press (Figure 3).
4. You will be presented with a list of phone profiles for different situations and environments. The one you're currently using will be ticked. Highlight the one you want to use (in our example, Normal) and press the Edit button at the bottom of the display (Figure 4).
5. You are taken into the profile settings (Figure 5). At the top of the list you'll notice three tab icons - these represent (from left to right), ringtone, message alert, and keypad sounds. You can switch between settings for these by tapping one of the tabs.
6. You should be taken first into the ringtone settings list. Should you want to change the Call alert type (from melody to vibration then melody, for instance) tap this option and scroll through the list of options to choose the one you want.
7. To change the Voice call ringtone, tap this option on the screen. You will be taken into a list of phone file folders from which to choose your ringtone (Figure 6). You can tab across to view files stored on a memory card, if you have one installed.
8. Press the Sounds option. You now have the choice of choosing from yourMusic files, Ringtones that are loaded onto the phone, or My voice clips(clips you have recorded) (Figure 7). You can select from whichever of these folders you want - the setting procedure is the same for each. In our example, we'll choose from our Music folder to select one of our tunes as the new ringtone.
9. Press the Music option. A list of tracks appears (Figure 8). Tap the one you want in order to highlight it (Figure 9). Press Options, then tap on theSelect menu option to install it as your ringtone (Figure 10).
10. You are now taken back to the Normal profile settings, where the Voice call ringtone has changed (Figure 11). To save this change, press Options and then Save (Figure 12). Alternatively, press Back and you will be asked whether you want to Save?. Press Yes.

In the ringtone settings menu, you can also change the video call ringtone (which is lower down the menu) by following the same procedure.

i will follow up and let you know