RX3715 Won't turn on or charge, won't respond at all!
I have just changed the screen of my RX3715 (bought a part from ebay and did it myself). I've just gone to charge the unit up and it won't respond to anything. I've tried it with and without the battery and I've also tried to charge it with my TomTom charger and the ipaq adapter with no joy.
I was very gentle whilst changing the screen and, as far as I know, all of the bits went back where they were supposed to.
Does anyone have any ideas as to what could be wrong? Many thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you need a new phone i think you broke the motherboard in the phone i did this as well and tried to fix it myself when i took it in to get fixed they said that the motherboard was broken and that i just needed a new phone... good luck look at it and make sure nothing else had been disconnected also look at the charge points and make sure nothing broke off and got stuck in there i know simple stuff... but sometimes thats the problem...
If the rechargeable battery is more than 3 - 4 years old then the battery could be worn out. Rechargeable batteries have a finite number of charge and discharge cycles and will lose their charge capacity over time, i.e. won't charge to 100% and gradually the charge reduces until the battery won't charge up at all. OR The battery shows a 100% charge but when the adapter is disconnected the battery drops off to zero capacity in a very short time. If the battery drops to an unacceptable charge level then the battery needs to be replaced. Rechargeable batteries will fail if stored in a discharged state for long periods.
U can call your service provider they might be able to help ifthey cant assist you contact the phone manufacture either way you will get ananswer to your problem.
HOpe you did the hard reset by pressing and holding home +power and then alt+w .
Does pressing and holding camera and power gives you the bootloader ( Hboot ) screen . IF yes , try reset from there .
ALso CLick HERE for more details .
×