Buttons to push on universal remote to program channels

This is a link to your RCA RCR311W universal remote users guide. This download is in .zip format, and needs to be unzipped (extracted) with winzip or other program. Then it can be viewed using Adobe Reader (.pdf). Codes are located in the back of guide.
http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=rca&dv=universalremote&md=rcr311&kw=&st=&ar=&dt=&so=&pg=1&file=others/rca/rcr311-manual.zip

Hello gailyoumans,

Here are the codes for your Magnavox Tv,

006,007,010,011,013,016

Press and "HOLD" CODE SEARCH.

Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.

Enter the three digit code

With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps with a different code.

Hope this helps you out, If so then please leave a thumbs up.

Cheers Little Dish Fitter.

WHAT BRAND OF TV ARE YOU TRYING TO PROGRAM

i need to program my radio shack 3 in 1 remote but lost the instructions

You can download the manual at the following link.
It is kind of a big file, so it may take a while.
http://www.retrevo.com/support/RCA-RCR311W-Universal-Remotes-manual/id/402ci571/t/2/

Just click on the get manual and then download.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I have managed to answer your questions and have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot give this post a “FIXYA” (Two Thumbs Up) rating then please comment to this post and I will try to help you further.
I try to provide the best FixYa experience.

For this type of problem you will need to call the RCA customer support at this telephone number 1-800-645-4994. Give them the model number of your remote control and ask them for assistance with your problem. Thank you for using FixYa and have a nice day!

1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!

Here's the link to download the manual.
http://66.77.167.109/rcaaccessories/RcaaccessoriesInfo.do?findManual=RCR311W

http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=rca&dv=universalremote&md=rcr311&kw=&st=&ar=&dt=&so=&pg=1&file=others/rca/rcr311-manual.zip