Question about Orion1934 19" TV

2 Answers

Orion tv model 1934 only 3, 4 and aux no pic or sound!!!!!!!!!!!!!

Somebody please help i have an orion tv model 1934 when i turn it on the only channles i get is 3, 4 and aux i have it hooked to cable no cable box that doesnt work so i unhooked it from cable and put an antenna on it that didnt help i went to menu thinking maybe something might be in there to help fix it but i dont know the v chip code or even know how to reset the code i need some serious help before my daughter comes back home on monday to get this tv working. please help me im at my witts end with this tv!!!!!!!!!!!

Posted by on

  • brenda silva Jul 29, 2007

    this did not help i can now with the remote change the channels by number but there is no picture nor sound what do you suggest to do next

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers

Turn the set on, hook the cable directly to the TV, take the remote control and press 1 - 1 and if the TV tunes in channel 11 then your set is fine. If the TV was autoprogrammed when hooked to a cable box then the only channels that will be stored in memory are 3, maybe 4 and AUX. To correct this simply go back into the menu and look for the "autoprogram" option and perform the autoprogram while the cable is directly connected to the TV, without a cable box.

Posted on Jul 29, 2007

  • James Mayo
    James Mayo Jan 26, 2014

    my tv is an sansui model no.HDLCD1955B and i need help with that im stuck because i don't know kind of box(convertor to use

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

For the vchip, this works on most Orion TVs:
Turn the volume down to 0 then change to a blocked channel. (where it asks for v-chip password) Next, on the TV, not from the remote, hold the volume down button, and hold the '0' key on the remote for between 2-10 seconds... the screen should unlock and you should have no V-Chip restrictions.

Posted on Feb 11, 2009

Ad

1 Suggested Answer

hamptoj2

  • 1 Answer

SOURCE: orion tv model 1934 only 3, 4 and aux no pic or sound!!!!!!!!!!!!!

i have the same model, so try going to menu and doing the add/delete channel thing....also i found that i only get all my channels if the tv is set to catv instead of tv

Posted on Jun 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost channles


Look in main menu, set is now in the air band which is 2-13 and you want it in the catv or cable band.

Aug 27, 2012 | Orion1934 19" TV

1 Answer

How can I hook up a Magnavox dv220mw9a DVD/CD player to my Orion 1934 19" TV?


One possible solution would be to use an RF Modulator. This will convert the composite (red white and yellow jacks) output from your player to channel 3 or 4 on your tv. Try radio shack or any store that sells electronics to find one. Follow the instructions that come with the RF Modulator.
I hope this is helpful.
Bobya.

Jan 05, 2011 | Orion1934 19" TV

1 Answer

We have an orion model 1934 tv and can only pick up a few channels on it-less than 12 and it is hooked to our cable which has 70 channels access. this is a 2002 year make so i think it should pick up a lot...


If you can, go into the ch set menu and change it from tv to catv(cable). then run the auto ch memory. I hope this helps. Orion's free help line is 800 289 0980.

Dec 17, 2008 | Orion1934 19" TV

2 Answers

Orion VCR 213 will not record with converter box


The chain of cabling that you have should go like this; First in line should be the wall supplying the cable box. Then, the cable box connects to the VCR, then the out of the VCR should go to the TV. Select whatever channel you desire, make sure that the VCR is on Channel 3 or 4, (Whichever the back of the cable box is set) then select 3,4 or line/AUX to see the results....accordianman

Dec 12, 2008 | Orion VR213 VHS VCR

3 Answers

No remote for small Orion TV - Input mode?


did you figure it out? i am trying to get my orion tv1333 to go into aux mode without a remote. thanks.

Sep 16, 2008 | Orion STV2763 27" TV

1 Answer

Just want the Orion TV (Model: STV 2763) to play VHS videos


Problem Solved:

Take your connector with the 3 colors red,white & yellow and plug into VCR OUT. The other end (w/ 3 plugs) goes into the INPUT on the back of the TV. Next insert a VHS Tape & search the TV for input or a channel below #2 for Cable#1,2,3 or AUV Channel.

In this case; Channel AUX #1
Shows / Plays Video w/ clear sound & picture.

Yahoo.

May 21, 2008 | Orion STV2763 27" TV

1 Answer

Orion tv model 1934 only 3, 4 and aux no pic or sound!!!!!!!!!!!!!


i have the same model, so try going to menu and doing the add/delete channel thing....also i found that i only get all my channels if the tv is set to catv instead of tv

Feb 22, 2008 | Televison & Video

1 Answer

TV will not get cable channels


If you have it hooked up to a digital box, it shouldn't matter if the TV is on cable or antenna mode. The only thing that matters is that the TV is on channel 3. Channels will be changed on digital box. Some newer TV's use input 1 or 2 or AUX for it to work. If I were you i would hook everything up and start playing with the channels going up and down until you get a picture.

Dec 28, 2006 | Orion1934 19" TV

1 Answer

Concierge series 25" wont stay on channel 3


You have to have the original remote. Then go into the menu under channel set-up. punch in channel 3 press add. The punch in channl 52. then press delete. Or turn on the cable box and go to auto tunnin g and let it do its thing. Im sorry , but if you dont have the original remote with a menu button your going to have to live with your problem. Good Luck

Jul 30, 2006 | Zenith C27A24T 27" TV

Not finding what you are looking for?
Orion1934 19" TV Logo

1,027 people viewed this question

Ask a Question

Usually answered in minutes!

Top Orion Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Are you an Orion Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...