Sir, Since few days , I get problem in playing the CDs. The Discs do not attach to the spinning wheel over the Laser, making magnetic function All other functions like roatating the tray disc, finding the no. of disc , and open close of the tray etc. are ok,,, After some effort I found that it worked for two times, after cleaning the dust here and there.and now instead of so many efforts it does not play.. The audio cassette and radio function is nice...Pl. show me if you find any solution.. IThe warranty is already is over..
SOURCE: aiwa cx-nmt 720 model 3disk will spin briefly but will not play
change the tray motor run to slow
Posted on Jan 27, 2008
SOURCE: I have an Aiwa digital
Hi
Hope this helps.
Ken
Posted on Aug 14, 2008
This can be fixed by adjusting the POT on the rear side of the laser. My Aiwa had the same issue and there is an orange screw on the rear of the laser. Turn it about 1/16 - 1/8 turn COUNTER clockwise.
Please understand, this is a temporary fix, and will eventually ruin your laser mechanism completely. The company is out of business and the unit is 10 years old, so I didn't much care...perhaps I will run across a CD assembly I can replace it with, but this is a temporary fix for this issue.
Posted on Dec 26, 2008
SOURCE: Aiwa cd player model CXZR525U loads the cd's and
Try using a lens cleaner to clean the lens it is likely that the player cannot read the disc after it spins it.
Posted on Oct 07, 2009
727 views
Usually answered in minutes!
I have the same problem. Great little machine but the CD doesn't spin anymore. Have you found a solution? [email protected]
The CD Player of my Aiwa CX-ZR525 is not playing. What do I do? Where do I take it to for repairs?
×