Code F7 appeared during oven use

GE oven error code "F7" and how to fix it ' AskGene.com

www.askgene.com/.../oven...codes/ge-oven-error-code-f7-and-how-to-fi...

Jun 23, 2007 - The error code "F7" will be displayed along with a beeping sound if the ERC (Electronic ... We have a GE Spectra Oven - GAS - we keep getting F7 errorcodes and the oven will not heat. ... In my case it was the keypad.

Why is my GE Range model number JBP80SM2SS making ...

www.shopyourway.com > Manage My Life > Questions

Apr 6, 2010 - Get shopping advice from experts, friends and the community! I was boiling water on back burner of ceramic stove top GE range Model ... When anyappliance picks up an error code or starts beeping the problem that caused it ...

Hello Michelle, thank you for your inquiry!

Typically error code F7 indicates that your Frigidaire range is experiencing a failure with either the potentiometer or UIB (User Interface Board). Let's try resetting you range by unplugging it or flipping the household circuit breaker off. This usually clears most false error codes. It is best to wait approximately ten minutes and then turn on your appliance. If the error code persists, it would be advisable to contact an experienced appliance repair tech to assist further.

Best regards - Z

Hello,

The F7 error code means that a function key on the touchpad is shorted or stuck, the F7 can be cleared by pushing the clear/off button,if the error code returns the touchpad would need to be replaced.


GENE

Hi,

Here is a tip that I wrote that will help you with the Xl44 profile error codes.

Oven Fault Codes for GE XL44 Oven

heatman101

F7 Function key shorted Replace touch padThis is what the code means. The key could just be stuck. Try pushing it several times to see if it will unstick. before you replace the touchpad.

Hi there,
Well, F7 error code occures due to
A = Function pad button stuck or 
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Replace the ERC there are ten screws 3 on each side and 4 on the control leave the hex screws alone all you need is a phillip screwdriver.
REMEMBER TO SHUT OFF THE POWER FIRST lift and fold out the control panel remove the ribbon cable and remove the four screws that hold the control board . replace control panel in reverse order.

Good Luck!!
Have a nice Day!!
Thanks

stove works oven won't lite

spectra stove and it is beeping and reading f7 we have unplug it and replug please help me

Try shutting breaker off for 20 - 30 mins see if it resets itself, if not F7 code means possible bad EOC (clock).

my automatic cleaning setting in my oven will not heat up. I set "clean" on both dials and put the lock on, the fan comes on but no heat. Is there a certain system to turning it all on and the timer so it will work?