Kenmore 78812 / 78814 / 78819 Gas Kitchen Range Logo

Question about Kenmore 78812 / 78814 / 78819 Gas Kitchen Range

1 Answer

My stove whenever i use my oven, after about 20 mins the oven cuts off and on the display window shows "EO-F2". Does anyone know what that means? I notice it happens more in the summer when the weather is humid. Sometimes if i unplug it for a period of time and plug it back in it works.Please help!!!!!!!!!!

Posted by stacey barnett on

  • Anonymous Nov 11, 2007

    My range and oven are both off. I have not used either one in over 12 hours. And now it beeps and dispalys the EO F2 code and makes annoy noises.



    I have not tried to do anything as I was concerned that this could be a gas related problem.



    I will try unplugging it for a short time then plug it back and see what happens

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 183 Answers

This indicates that the control coolinf fan is not working correctly so the safety thermostat cuts out the cooker until the surface area cooles down, this could be caused by a faulty fan motor of a faulty cut in thermostat Regards, Engineer

Posted on Jul 28, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Hi I am getting an EO-F2 display on my stove Could you please tell me what this code signifies is the problem? Thank you Kurt

Hi
Error F2-E0 error means a loose/broken wire on the oven temp sensor or the sensor is bad and should be replaced. To solve this issue start by checking the oven temp. sensor for 1100 ohms, if the rating is more then that then check the control and door switch and replace the part that is bad. Hope this helps...please post back for further assistance.
Daniel
0helpful
1answer

Hello. I have a Kenmore Ultra Bake, with push button control. After wiping down the panel it went crazy. The panel is now showing EO F2 and continuously beeping. I can use the stovetop, but can't turn...

Hi

Thanks for using FixYa. Error F2-E0 on your oven means that the keypad is shorted and to resolve this issue you'll have to replace the electronic range control/clock(ERC). Please do rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee
3helpful
2answers

Diplay Panel shows: F2 EO

hello there:
the dreaded F2-EO code appears when the keypad has shorted out and needs to be replaced this is also known as the electronic range controle tis costs about 180 dollars and if the controle board need to be replaced this is about 250 dollars so if you can i would have both of them tested out before you spend your money on somethng you really dont need if you have the warranty you can use it to have it tested ok
Best regards Michael

0helpful
1answer

I can't find my model number on my Sears Kenmore Gas stove. Several times now the stove has beeped then kicked out with EO and F2 showing in the clock area. The stove was bought in 2000 or 1999. Can you...

Hi,

The tag with the model number is usually located on the rail that is visible with the lower drawer open.

The code you are getting is an indication that the oven got too hot or the control thinks the oven got too hot. It is usually do to one of two parts that have failed.

If the oven did not get too hot and you got the failure code, then the sensor would be bad.

If the oven did get too hot then the ERC (electronic range control) is bad.
0helpful
1answer

Whirlpool Gold Range Error code EO F2

On this website: http://www.repairclinic.com/0078.asp#Whirlpool , it shows all of the codes for the Whirlpool errors. Based on the remarks, if it shows a "4 digit failure code" it is "Shorted keypad"
"Replace Electronic Range Control/Clock (ERC)"

But verify this as I am not an appliance repair specialist. I am a computer nerd who just knows how to find information. I am actually trying to figure out an answer to my own problem with my Whirlpool Gold Accubake.
0helpful
2answers

EO F2 code

THIS IS GENERALLY A BAD ELECTRONIC RANGE CONTROL OR ERC BOARD

If you need further help, reach me via phone at https://www.6ya.com/expert/marlon_56d9a24f02585258

Not finding what you are looking for?

125 views

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Cindy Wells

Level 3 Expert

6450 Answers

Oloyede Monsuru

Level 3 Expert

1468 Answers

Paul Carew

Level 3 Expert

3721 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...