Wont fill Frigidaire Affinity 3.5 Cu. Ft. 7-Cycle King-Size Capacity Washer

4.5 cu. ft. capacity
Loading suggestions (maximum size loads)

Heavy Work Clothes 2 pair pants 3 shirts 3 pair jeans 1 coverall

Mixed Load 2 double sheets or 1 king size sheet(s) 4 pillowcases 6 T-shirts 6 pair shorts 2 shirts 2 blouses 6 handkerchiefs

Towels 8 bath towels 8 hand towels 10 washcloths 1 bath mat

Dedicates 3 camisoles 4 slips 4 pantes 2 bras 2 nighties
EXPRESS WASH cycle (2-3 garments) 2 dress shirt 1 pair dress pant

http://www.sears.ca/manuals/div-26/26_592_49102%20%20%20592-491020_BOM_2009.pdf

Thank you for your post, Joel!

From the information you have provided you would like to change the temperature on your Frigidaire washer from Fahrenheit to Celsius. I was unable to locate any information regarding changing the temperature on your washer. If you need any further assistance please feel free to reconnect. -Matt

Good Morning Heather,

I understand that your Frigidaire washer, model# FTF2140, begins to fill and then turns off. You unplugged it, trying to reset it, and now the lights are not coming on and your washer is not working. Since you have already reset your washer, by unplugging it, I suggest contacting your local authorized technician for further assistance. They will be able to diagnose your appliance and determine what the cause of your washer not working is. Hope this is helpful.

-Best Regards-
WP

Hi Heather, this is Z. Thank you for your post!

I see that your question is listed under a Frigidaire front load washer, FTF2140FS. Please help me understand if the question you are asking is related on how to clean the tub of your washer. If so, you may add a 1/2 cup of liquid bleach to the detergent compartment of the dispenser drawer and fill the bleach dispenser compartment to the Max Fill level and run WITHOUT a clothes load using the Normal Cycle to refresh the tub. I hope this is the information is that you are seeking, otherwise if you have further questions, please do not hesitate to reconnect!

most likely there is something stuck in between the inner and outter tub

Thanks for choosing FixYa and welcome.

post model number please