Does the Dect 6.0 recognize when a phone number needs a 1 before the area code (1-800-.......)?   I entered some numbers with the required 1, and some without it.  All the calls went through.   In a few months, my phone number will require the full 10 numbers due to an area code overlay.  Will I have to store in my phonebook the required 1- before the area code?  Please respond, as this is very important.  Thank you.

Step 1: First, Bigpond users need to sign in their Bigpond email account. If login can not completed, Click the "I forgot my password" page.
Step 2: After completed above steps, Bigpond users need to choose bigpond account recovery option.
Select the suitable option which one can fix users problem. (Other option is preferred)
Step 3: Bigpond email password recovery process now begins, Now Bigpond users will be landed to a page with a CAPTCHA form.(To Verify its Human or Not)
Recover Telstra Bigpond email account when Bigpond email backed up with a mobile phone number or a recovery or alternative email address
Step 4 - Choose Recovery Option (By recovery phone number or alternate email address)
Step 5 - Enter Bigpond account recovery email address or phone number which one mentioned in Telstra bigpond email account.
Step 6 - Now Bigpond user will get a "Verification Code", Click Submit
Step 7 - By entering the verification code that will taken Bigpond users to Next page, where Bigpond users can easily access their account by changing Bigpond email password.
Step 7 - Once Telstra Bigpond users change their account password then Bigpond users account recovery will be be complete, Now Telstra Bigpond users can access their account.

For more informaion:-
Call Bigpond email support toll-free number 1-800-980-183 Australia and find instant help to reset bigpond email password. Bigpond Email Support Call 1 800 980 183 Bigpond Support Number

New telephone company procedures in many areas now
require that all 10 digits be dialed even for local calls --
Area Code + Exchange + Number

Perhaps your Directory listings do not include the area code ?

Good luck!

For the Uniden DECT 6.0 6035 system...

Setting a Security Code or Personal Identi?cation Number (PIN)

To play your messages from a remote location, you will need to enter a two-digit security code or Personal Identi?cation Number (PIN). The default security code is 80. To change the PIN:

1) On the handset, press [Menu/Select]. Select the ANSW. SETUP menu, and then the SECURITY CODE submenu.

2) Use the number keypad ([0] through [9]) to enter a two-digit security code (00-99).

3) Press [Menu/Select]. You will hear a con?rmation tone.



Here is the manual:
Uniden 6035 1 Owner Manual

You can change area code for free one time . after that (or a custom/vanity number)you will have to pay 10$(a reactivation fee)

1- my.magicjack.com

2- Enter your phone number and password, then click Login

3- Click the "My Subscriptions" tab

4- Then scroll down and click "Change Phone Number" button

5- Now click the "Change My Phone Number" button

6- Click "Add a new number for $10" then click Next

7- Select "I Want a Vanity Number"

8- Follow all the prompts to add your vanity number and enter the number you want when prompted




You might also contact them and give the some kind of "sob story" of why you need a free number change.

talk with your service provider
if the number 1 is placed before a local number then logically when calling that number, the number would be recognized as a local number and be charged as such
Form what you say , if the number was from a caller in a different state and the number was prefixed by say 6 then the system would recognize that as a long distance call
again talk with your service provider and if accurate contact your state governor or senator and make an issue of the law requiring the prefix number on caller id

I have reviewed the User Instructions for your model and there is no mention of error codes, such as E1. I did find a contact number for customer assistance, so I think you need to give them a call:
1-800-448-0329
Be sure to have your model number information handy when you call. Good luck!

Since you neglected to specify the model of your Uniden DECT 6.0 system I can only suggest you select it from the list beginning here to download a copy of the manual.

Calls outside your area code need the area code. Some parts of the country use ten-digit phone numbers for local calls, in these cases the area code is needed. Other parts of the country use seven-digit phone numbers for local calls, in these cases the area code is not needed unless you're calling outside your area.

It seems you need to dial the Country Code as well as the area Code and Telephone Number: ie:00-1-(area code) - number, as the call is routed through the UK

Just purchased the GE 25922 today. Looks like you can skip (ignore) the option to enter an area code.

United States' Area Codes are three-digit numbers. If the phone 'requires' entering a number you can use any three digit number. The purpose of this option is to display a local telephone number with only the 7 digits.

Example:
603 - 123 - 4567
'603' is the area code
123-4567 is the 7-digit local number.

If the area code option is programmed to '603', then if that number called '123-4567' would display on the Caller ID display.
Which now reminds me: you would need to also subscribe to Caller ID with the Telephone Company for the numberic display to occur.