Question about Indesit 23 in. DV62 IX Built-in Dishwasher

1 Answer

Dsihwasher Door adjustment

I have an Indesit DV620 dishwasher with no instructions. I have details on fitting the integral door which show someone with a screwdriver at the top of the door and a + symbol near the door. Doesnt really help or mean much to me. How do i adjust the door so it stays open once opened? At the moment it springs back hard enough to break your jaw if bending over it! Any help or advice greatly received Thanks Dan

Posted by Dan Cumberland on

  • Dan Cumberland Aug 06, 2007

    Advisor, many thanks but where do i find the spring tension adjuster?

    Dan

  • Anonymous Nov 25, 2007

    Yes, I have the exact same problem! It breaks glasses, it shuts so hard.

×

Ad

1 Answer

Tony Coultrip

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 183 Answers

Turn the spring tension screw anti clockwise to reduce the spring strength Regards Engineer

Posted on Aug 05, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SWITCH NOT WORKING. I HAVE GOT PART FROM INDESIT. HOWEVER, I CANNOT TAKE BACK OF DOOR OFF TO GET TO THE SWITCH TO REPLACE! THOUGHT IT WAS POSIDRIVE BUT INSTEAD EACH BOLT HAS STAR SHAPED HEAD - WITH 6...


These normally need a specific screwdriver which can be got from most hardware stores or if you have a small enough flat head screwdriver that fits between 2 of the star tips then you should be able to remove them.

Mar 31, 2011 | Indesit Dishwashers

1 Answer

Indesit model DG5400wg dishwasher can I fit new bottom door seal without removing the door bernice. If not can you tell me how. I'm fairly nifty wuth a screwdriver.


If you have a 90 degree screw driver you may be able to fit it enough to remove the 5-6 screws holding it in. may take some time but can be done with the right tool.

Dec 20, 2010 | Indesit 24 in. D63 Free-standing...

2 Answers

Glasses are cloudy and rust spots on cuttlery


I had the same issue until I switched from Cascade to Electrosol. I still use the Cascade rinse solution in the door dispenser. Also use the heated dry option. The energy saving option seems to promote clouding.

Jan 10, 2009 | Indesit 23 in. DV62 IX Built-in Dishwasher

1 Answer

Indesit D4000 Dishwasher seal


you will find the door seal has some shape to it at the two corners,if not fit the seal from one of the bottom corners first with about 3-5millimeters passed the frame that the seal fits into,then push in all the way round to the other end,the seal has a flap type shape on it which should be fitted with the open end apearance of the seal (flap)pointing towards the door

May 30, 2008 | Tappan 18 in. MDR251RE Built-in Dishwasher

4 Answers

Indesit dishwasher


I had the same problem, so I took the door apart as explaned above, found it was gunged up with residue from the washihg cycles. Gave it a good clean, while the part was disconected of course, and hay presto! the door works like new again.

Jan 06, 2008 | Indesit 24 in. D63 Free-standing...

1 Answer

Indesit DV620


check your manual it should tell you what this code means and wether you can deal with it yourself

Nov 22, 2007 | Indesit 23 in. DV62 IX Built-in Dishwasher

4 Answers

Broken door handle Indesit dishwasher DG 6100


I agree read "broken door catch" solution and be particularly careful in respect of the edges of the stailess steel panels - some of the edges are hidden and they are very sharp.

Jan 29, 2007 | Indesit 24 in. D61 Free-standing...

1 Answer

Door catch plate Indesit d61


undo the screws at the top of the front door and puul the control unit out this gives you acsess to the door catch which is quite simple to replace be careful the stainless steel is quite sharpe

Dec 03, 2006 | Indesit 24 in. D61 Free-standing...

Not finding what you are looking for?

Open Questions:

See all Indesit 23 in. DV62 IX Built-in Dishwasher Questions

Indesit 23 in. DV62 IX Built-in Dishwasher Logo

510 views

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Paul Bade

Level 3 Expert

1688 Answers

NOEL
NOEL

Level 3 Expert

8549 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...