We have as Whirlpool FXTM6 induction oven .. (and no manual). The display stays on 'STOP' no matter what you do.. how do i get out of this?

Full make and model are useful in such questions. Answer deleted.

When you see a code,follow these steps to solve the problem:

• Press "Stop/Clear" to clear the display and stop the beeping.
• Reprogram the oven.
• If the code still displays, turn off the power to the oven at your breaker box and wait five minutes before turning it back on.

If none of these work, please consult a repairman

You will definitely need the correct fuse. Get someone competent with a meter to test the circuits. Test the original fuse before going further to see if it is OK or not.

Did u ever find out.mine is doing the same.ive searched everywhere and can't find an answer

Recycle the circuit breaker for the oven several times. If you haven't used the oven much the contacts may be corroded. The display is off a 110Vac circuit but the ovens use 220Vac, The circuit breaker should be 2 switches "ganged" together as one. Both should be cycled...

magnetic gradeI have a SCHOTT Ceran glass ceramic cooktop as well, and soon realized that induction cooktops like this require that your metal cookware be in contact with the surface for them to heat up. Best cookware:

• Cast iron pans
• Any black metal pans
  
• Stainless steel pans, if base is magnetic grade (magnet sticks to bottom)

Read more: http://www.us.schott.com/hometech/english/products/ceran/dailyuse/index.html

You can do this by:
Check the oven display to see whether the screen says "LOC." When "LOC" is displayed, the oven lock is activated and the door cannot be opened. You need to make sure it is locked so you do not mistakenly lock the door.

2 Press and hold the "Stop" button on the oven control panel until "LOC" disappears from the display. Some oven models have a button marked "Oven Lock," which should be used instead of the "Stop" button.

Lock the oven again by pressing and holding the "Stop" or "Oven Lock" button until "LOC" appears in the display

my induction ceramic cooktop is showing an error code E6 on two of the elements...what is the problem and how do I get it fixed

Call 1 800 442 1111 Its whirlpool they own kitchenaid. they can find a local tech for you