My dvd home theater sound system is saying mode not supported i

Is it a copied DVD or DVD-R / RW? If if says resolution not supported then it means that the DVD has a video format that cannot be played on the Bose even though the sound track is fine. The DVD may work fine on a PC as these can usually play more file types, but it could be a number of things causing it not to work and unfortunatetly there is nothing you can do.

Check whether you have connected your HTS video out put to TV/PROJECTOR 's Video input. Try HDMI port for better result.

How can i clear my panasonic dvd how theater sound system model # sc-pt760 from showing DVD H03

If you do not have a manual for the machine down load one at http://www.samsung.com/us/support/downloads/LN32B460B2D

It will show you how to set up a Home Theater Connection

Connecting an Amplifier / DVD Home Theater

TV Rear Panel

1 Audio Cable (Not supplied)

Amplifier/DVD Home Theater

1 Connect Audio Cables between the

AUDIO OUT [R-AUDIO-L] jacks on

the TV and Audio Input jacks on the

Amplifier / DVD Home Theater.

When an audio amplifier is connected

to the AUDIO OUT [R-AUDIO-L]

jacks: Decrease the volume of the TV

and adjust the volume level with the

Amplifier's volume control.

Each Amplifier/DVD Home Theater has

a different back panel configuration.

When connecting an Amplifier/DVD

Home Theater, match the color of the

connection terminal to the cable.

?

?
?

Try switching the sound mode with the "PL" button

Plug a yellow video cable into the TV (IN) and the Sound system (Out) then go onto AV1 on the TV or which ever port you plugged the cable into and play a movie and u can see it. A menu doesnt come up like the A ipod funtion so it comes up no signal until u play an actual movie on the ipod. If u dont have a yellow video cable i think u can use the white or red audio ones.

Press and hole Scan Mode button for 2 seconds, Y/C will show in front display, use > to change to RGB then press OK.

Basic checks first. Have you checked they are connected properly? Maybe used a different cable to check whether the rear cables are faulty? You may just have turned your system to 2.1 surrououn sound by accident or be playing a format that only supports 2.1. Check that in the system menu under dec. mode that if it is set to AFD STD that you are playing a DVD which shows can support 5.1 on the back of its cover. Also try running the setup manually and choosing your speaker configuration. Hope this helps.

Sounds like it's just in 2 channel stereo mode, only 2 speakers working out of 5 and a sub, look for a selector switch for switching to 5.1 surround, as far as the no video problem try replacing the cable for the video connection. 

when i turn my home theater system on it says f61 then it shuts off can u plz help me out here =[