When i want to take a photo with my camera it says "Preview error". What is the problem?
And my messages doesn't seem to be going through. My reports are on but i get no indication that it has indeed gone through.
Also my keypad just below the screen where the answer and reject buttons are the lights have started to flicker and sometimes it doesn't want to do what i tell it. It is refusing to go into one of the menu options.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
try a factory reset on your mobile, it will help restore it's previous states and working attributes. type in your keypad menu *2767*3855#, be sure to back up everything first before you do a factory reset..
The E16 error is a circuit board problem and is not user fixable. It needs to go to a Canon service facility. Try to get it fixed under warranty, if possible. If not, get an estimate before repairing, as price may be prohibitive. Weigh repair costs against replacing with a new camera.
This can work with CoolPix S10 1) Remove battery. 2) Replace Battery (Insure it is fully charged) 3) Press the Shooting/Preview button and keep pressing it while you press the power on button. This tells the camera to go into PREVIEW MODE without checking the lens. See if you can preview a few photos and that it works in preview - If it does NOT I cannot help you here. 4) If the Camera Works in Preview mode then press the Shooting/Preview button to put it back into "Take Photo Mode". 5) There can be a delay but it starts up without the lens error. 6) Make sure the ZOOM IN and OUT works and in most cases if the lens operates then you can take a photo. If the Zoom in and Out does not work you have a jammed lens. 7) If the LENS is Jammed AND it is OUT of warranty you 'might' want to tap the lens barrel against your palm. I have found when you remove the battery you can gently tap the lens into telephoto mode by tapping the back of lens assembly into your palm.