Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

Question about Cyberhome CH-DVD 300 DVD Player

2 Answers

No video I was playing around with the setup menu and somehow changed the features so that I don't have any video capabilities. Audio works, but no video. Not even the Cyberhome screen doesn't show so of course no menu either. Can't change it back. What to do? Diana

Posted by Diana Galbraith on

Ad

2 Answers

Anonymous

Yup its working for me... thanks for the suggestion

Posted on Aug 19, 2007

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 135 Answers

If you select Progressive Scan and your television doesn?t support it, you may end up with a blank screen and be unable to view the menu in order to fix it. If that happens, fix it by turning the DVD player off then back on. Open the disc tray, then press and hold the STOP button for five seconds.

Posted on Aug 10, 2007

  • Anonymous Aug 10, 2007

    This is a quote, by the way, from an "ehow.com" article. I wouldn't want to take credit for someone else's writing. ;)

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Setting time on Alpine iXA-w404

Are you holding the setup button down for at least 2 seconds? Then using the >> to switch items for setup? If you don't have the manual, download it here and flip to page 20:
http://support.alpine-usa.com/products/documents/OM%20iXA-W404_EN.pdf
0helpful
1answer

I have a cable box connected to reciever and was working fine for months, now i get no picture on tv only sound. I use hdmi cable out to tv that also uses my ps3 to tv which is working fine. What...

I don't know what kind of TV you have and what kind of output capabilities you have but, while your receiver will transfer your video signal, it is not the ideal way to hook it up. The port you are using may have to be reset somehow or, may have gone bad. Ideally you want to hook all video componenets directly to TV then, use, digital optical is best, audio out from TV to receiver. If you have more than 1 input in to TV, you can run your PS3 and cable box directly to TV, using the TV's menu to select which you are using, then, run your audio out to receiver.
0helpful
1answer
0helpful
2answers

I have a rca truflat tv 27F522T how do i change it from mona to stero

This is a stereo TV:

From the manual:

Stereo Capability: Includes built-in amplifier twinspeaker
system; allows reception of TV programs
broadcast in stereo.

Use a stereo cable
7helpful
2answers

I cannot get video picture,But ican hear all audio functions.

put a disc in the player and once it starts to play press stop, then press and hold the stop button for 5 seconds this will turn off the progressive scan feature.
1helpful
1answer

Audio on concepts digital 7.1mp camera

Try accessing the setup menu, options, or menu screens. There may be a mode on the selection dial, or it may be accessible through the video mode.

The camera also may not have audio capabilities.
1helpful
1answer

Volume is too low.

smith,

good day, not so familiar with this model but try this.

1) try to check in your DVD remote controller if it does have a + and - buttons indicating volume , if does have this features press + button to increase the sound output

2) if remote commander doesn't have this features try accessing the " SETUP" menu. most probably there would be a button in your dvd remote indicating this button "SETUP"

3)once you've access the setup menu, there would be a dialogue box indicating ( Video setup, Audio Setup, display setup, parental lock) insome cases it will show you a display picture of all this menu

navigate the dialogue box and look for "audio setup" once you've access this part there would be options and controls where you can change the volume/audio settings .


cheers,
mark
2helpful
1answer

Does my toshiba model have a digital tuner?

Negative. Here are the specs for your TV/DVD combo: I hope this solution is helpful. Please take a moment to rate this solution.

Toshiba MD13M1 Dvd Type: DVD player - built-in
Media Type: DVD, CD, Video CD
DVD Repeat Modes: A-B repeat, title, chapter
CD Playback Modes: Program play, random play / shuffle, all tracks repeat, one track repeat
Tv tuner Analog TV Tuner: NTSC
Reception System: NTSC-M
Analog Channel Qty: 181 channel(s)
Channel Coverage: VHF:2-13, UHF:14-69, Cable:1-125
MTS Stereo: Yes
Secondary Audio Program (SAP): Yes
Video features Closed Caption Capability: Yes
Closed Captioning on Mute: Yes
Remote control Type: Remote control - infrared
Features: Back-lit buttons
Connections Connector Type:
  • 1 x headphones ( mini-phone stereo 3.5 mm ) - front
  • 1 x composite video/audio input ( RCA phono x 3 ) - front
  • 1 x SPDIF output ( RCA phono ) - rear
  • Composite video/audio input ( RCA phono x 3 ) - rear
  • 1 x antenna ( F connector ) - rear
0helpful
1answer

Ilo DVDR05

To change from p-scan back to i-scan with no video picture, mu1 model: 1.turn dvd on with no disc, wait 10 sec. 2.press "setup" 3.press "down arrow"(selects audio/video) 4.press "enter" (selects audio/video menu) 5.press "down arrow" 4 times (selects scan mode) 6.press "right arrow" (selects scan menu) 7.press "up arrow" (selects interlace mode) 8.press "enter" (should see picture) Or find a tv with p-scan capability.
Not finding what you are looking for?

61 views

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

The Knight
The Knight

Level 3 Expert

76843 Answers

Ekse

Level 3 Expert

13435 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...