Admiral AW22 Top Load Washer Logo

Question about Admiral AW22 Top Load Washer

1 Answer

Admiral washing machine MOdel AAV7000AWW On any spin will not drain 1st time through

Whether rinse or final spin, the tub begins to spin albeit slowly. I have a clear hose so I can see the water moving but slowly. It will not completely drain 1st time through. If I take out the clothes then the water drains fast on the spin. Then I put the clothes in it and it will spin down. Otherwise, I have to go through the spin cycle 2-3 times to get the water out and clothes spun. This started happening about 2 weeks ago. Machine was purchased 1/2005. I checked to make sure the drain hose is not twisted. I ran it through with no detergent (just in case it is suds lock. It happens on the rinse and spin cycle. I alos checked to make sure I do not overload the machine. Seemingly, our behavior has not changed in how we wash clothes during this period. Thanks for your help.

Posted by Mike Martin on

  • 3 more comments 
  • zohair Dec 31, 2007

    same problem

  • Anonymous Mar 19, 2008

    i have mine apart and it is the pump locked up

  • PINKFLOWER Jun 03, 2008

    MY MACHINE WILL NOT GO INTO SPIN FROM ANY MODE

  • skpippins Jul 20, 2008

    I have the same problem help

  • Anonymous Mar 17, 2014

    Does not spin/drain all the water out of clothes.

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 38 Answers

Is this machine induction motor or carbon brush if it is the inductin you need to be looking at the capacitor and if it is carbon brush then change them you will find them mounted each side of the motor and the capacitor will be @ the top under the lid near the pressure switch good luck

Posted on Jul 24, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Admiral Designer Series Heavy Duty 20lb Extra Large Capacity Washer - won't drain

call a local repair service either the pump is gone or the line to it is plugged with perhaps a sock
0helpful
1answer

Admiral washing machine AAV7000AWW won't stop filling or agitate?

It is either the inlet velve or the cycle programmer faulty
0helpful
1answer

My admiral AAV7000AWW washer makes a loud chattering noise and leaks water..An solutions?Thanks a bunch

Chattering could be a shaft bearing and if it got bad enough could have damaged the tub seal and makes it leak. attached is a price on parts if your interested
http://www.appliancepartspros.com/07-tub-parts-for-admiral-aav7000aww.html
0helpful
1answer

Washer makes straining noise when draining water from tub while spinning?

my admiral washer machine model AAV7000AWW makes a noise only when draining/spining water, is no water spill at all. Thanks
0helpful
1answer

AAV7000AWW washer

sounds like the thrust bearing is worn causing an imbalance on the shaft. check herehttp://www.partselect.com/AdvancedModelSearch.aspx?ModelNum=AAV7000AWW&mfgModelNum=&fkMfgID=1:- for a schematic on this machine and parts as listed.. hope this is of some help
0helpful
1answer

Admiral washing maching model aav7000aww

Hello donerehart

You said, water and spin cycles are fine, but won't agitate... what can i do?

Sounds like the timer in the dial will not progress!
0helpful
1answer

Top load washer Admiral # AAV7000AWW

I would replace the belt part # 21352320 which cost about 20 bucks. Tilt the machine back when off and empty and look for a glazed belt with maybe some cracking and wear.
1helpful
1answer

Admiral Top loader leaking water

water inlet vale has internal malfunction
0helpful
1answer

Admiral Washer AAV7000AWW everything works -goes through cyclebut will not drain

You,ve done a good job the first time the pump fail MikieM. You can do it again. We sometimes forget to empty our pocket. Some small metal things could have gotten into the pump...could be other hard foreign object. Good luck.
Not finding what you are looking for?

411 views

Ask a Question

Usually answered in minutes!

Top Admiral Washing Machines Experts

Brad Brown

Level 3 Expert

19046 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Steve

Level 3 Expert

3290 Answers

Are you an Admiral Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...