Question about Symbol (LS4005I-I090-0000Z) Handheld

1 Answer

Symbol LS 4007i

I just get new barcode and connect it to the computer corctly when i try to read a barcode the light is green and i hear beep but nothing apear in monitor what should i do???? thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 661 Answers

Barcode readers are autonomous (no computer interaction required for them to work) readers beep to confirm that the barcode is valid, unfortunately this does not confirm that it has made it to the computer, you need to ensure that the driver & capture software is installed properly, check that the device is showing correctly in device manager. Gareth

Posted on Jul 26, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Playstation lights turn on, But nothing apears on screen?..........


Did your previously had it hooked up through hdmi????? Are you getting sound????? Try with the standby light on pushing in the power button and holding it until you hear a beep or two then let go....wait a few 10-15 seconds and see what happens....

Mar 28, 2012 | Video Game Consoles & Games

1 Answer

I Have a new symbol scanner LS1902T-1000, whose software/Driver got missing, when i tried to read the bar codes, the unit beeps and a green light come on but I do not see any thing in the screen Please...


Hello Sabrina,
it depends much on the connection between the scanner and computer. The good sign is that the scanner is set correctly to scan the barcode. You need also scan the correct barcode for the connection art. Please scan from the Product Reference Guide the Barcode for USB, RS232 or Keyboard Wedge.
The Product Reference Guide is located at http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=5880807apdf

Oct 22, 2010 | Symbol Cobra LS1902 Handheld

1 Answer

Symbol ls2000 hand scanner won't read barcodes. The laser lights up and it beeps when I scan but it takes in no data. I have tried the sets all defaults programming barcodes but all it does us make a...


If the scanner beeps just once after a scan, than he recognize the barcode and sends the data to the computer. If you dont receive any data, you are waiting for them on wrong interface. Data from USB or KeyboardWedge do come to Notepad/Word etc. The data from Serial RS232 Connection can you see only in Hyperterminal or similar application.

Sep 26, 2010 | Symbol LS2000 (ls-2000-i000ag) Handheld

1 Answer

Cant get computer to


Disconnect everything from the motherboard except the power supply, CPU and power switch.

Turn on the computer. You should hear 3 beeps because you removed the memory.

If you don't hear any beeps, check the power supply. Check all the connections. Did you connect the 4 pin power? Did you skimp on it? A common mistake is to get a cheap, high-power supply. Just because the box says it's 1000 WATTs doesn't mean that will carry a steady load.

Still nothing...

It's either a bad motherboard or processor. If you have another processor that is supported on that board and you know it works, try it. If it boots return your CPU for a good one.

Unfortunatly, if it doesn't boot with a known-good processor that just proves the board is bad; it doesn't prove your CPU is good. You may have more issues.

Mar 08, 2010 | ASUS M2N-E SLI (M2N-E SLI GREEN)...

1 Answer

Green light next to power button stays on - no response from computer, totally frozen for up to 12 hrs, then green light goes off, computer suddenly comes on for 5-10 min then freezes again.


Good day sir, hi, You need a thorough check on your PC.
But first try testing the Motherboard, Processor and Memory module.

As this point you need a friend, that knows how to tinker with your PC

Or you may need to do this.

1. memory testing:
Try replacing a new memory ram module on your PC, get the modules out of the memory slot, and let it be tested on another PC. if good,

2. power supply
Test for the power supply box, remove the 20/24 pin power connector from the mainboard and short the green and any black wire, your fan should blow out air.

3. Test for motherboard.
remove all coonections from the motherboard, except the 20/24 pin power connector, and the 12v 4-pin molex power connector, connect the pc speaker or the thumb speaker on the speaker port, connect a keyboard, clear the CMOS, (or remove the battery temporarily), connect the header panel (power switch, reset, power led) place the processor and memory (the tested good one). power on.


You should hear a beep (good) The keyboard will light up the three leds, then a few seconds, the numlock led.

If you hear 1 long and 2 or 3 short beeps, problem with the display section. Reseat any graphics card. test again.

If you hear continous beeps, reseat the memory, if the beeping persist, replace your motherboard.

If you hear nothing? only fan blowing, replace your motherboard.

I can only give you instructions, you need a someone who knows how to service a PC.

Dec 17, 2009 | Compaq Presario 5000 PC Desktop

1 Answer

I just got an LS4006i scanner with a ps2 connection. When I plug it in, it beeps 3 times. When I scan a bar code, it beeps once and the lite turns green, a slight pause the 3 beeps. nothing comes up on the...


The cable has to have a PS/2 keyboard connected to it and you must be connected to the keyboard port. Unfortunately this scanner did not support "Notebook" mode where you could make it think it was connected to a laptop and leave the keyboard connection open. The other thing to check is that the "IBM PC/AT" barcode is scanned from Adobe page 55 of 182 of the LS400Xi Product Reference Guide.

Nov 20, 2009 | Symbol LS4006 (SYMLS4006I10014) Handheld

2 Answers

Nothing comes up on tv when i turn ps3 on and controllers wont connect


Read this very carefully. Turn off your ps3 from the back. Then turn it back on wait unit the light is red. Turn on the system through the front keep holding the power on. You will hear a beep one time that just tell you that the ps3 is powering on keep holding the button until you hear the second beep this will rest your video setting. If that dosnt work call me at sony

Nov 07, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Symbol LS 4000i scanner issues


Hello, it looks like the scanner lost the settings. As power is there, so connection is ok. The several (four) beeps after reading the barcode means communication error.
Please try to find the original sheet with configuration barcodes or download it from support.symbol.com website, you would need to scan the barcode for IBM PC/AT & IBM Compatibles from Keyboard Wedge Chapter.

Aug 25, 2008 | Symbol LS 4000i Handheld

1 Answer

No bootup


there is nothing to be afraid of check the memory card whether inserted corctly in the slot or a faulty memory card

Oct 22, 2007 | Evga (122-CK-NF68-T1) Motherboard

1 Answer

StratosE ms2122, it scans it beeps but nothing appears.


most barcode systems will scan and beep when presented with a valid barcode (if the barcode conforms with a valid format). This just means it is powered up (it does not require any input from the computer to do this) I believe you have a driver issue, which controls how the scanner communicates with your computer. please check that you have up to date drivers and software from the manufacturer's website and that you can find the device listed (by name) in your Device listing Gareth

Jul 25, 2007 | Metrologic Instruments MS2122 StratosE...

Not finding what you are looking for?
Symbol (LS4005I-I090-0000Z) Handheld Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...