I have a sony dsc-w7 camera and after going through a airport scanner the camera stopped flashing then stopped workin all together. u press power and it makes noise and light by power comes on then offf then nothing. waht do u think is wrong?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.
It is not your battery. I turned it on and off a dozen times with no luck. The lese would make up and down movements, but would never close and camera would not work when open. So while I turned off, I softely push the lense in after a couple of times it went in and closed as normal. After that I turn it back on everything worked normally. Do not push too hard, it may damage the lese.
any camera that has a flash, can trigger a "slave" flash.
I have one that came with a little bracket that hooks into the tripod mount point. Work great, it also came
with a little tripod so that you could use it for backlighting, etc.