Recently, the display for my BT800... it still worked until a couple days ago... my phone/computer will not detect it anymore and I just flashed it and there is still the same problem... it responds though.. the blue screen still lights up and when I put it to my ear I can hear the beeps when I press the button.. can someone help?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi , may have been a random glitch during booting start up and Windows display was re-configured for onboard single display only , I suggest check Windows display configuration of Control Panel > Display , and ensure the required display is detected and designated as primary single display if not so
First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty. Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.
may be the power chord is damged go to a nearby shop and tell tham to
give you a new power chord of monitor and then try it should work fine thank for visiting fixya
have a nice day
×