I cant see my pictures

Hello,
Please do the followings.

1. Turn off the camera.
2. Remove the memory card.
3. Remove the batteries.
4. Wait at least 3-5 minutes.
5. Place the memory card and batteries.
6. Turn on the camera in any mode except review mode.
7. Take any ordinary picture.
8. Change the camera mode to review.
9. What happened now. Is everything normal. if not please write a comment to explain the situation.

"1M" stands for 1 megapixel. The camera is set take pictures in 1280x960 pixels mode. To change this press the F button and select another mode. 6M is the highest quality, but will reduce the number of pictures, you can take before the card is full. "423" indicates available space on the card. This number gets lower as you increase quality.

Please try to take as many pictures from memory stick as you can then format memory stick through format option in setup.
Hope this will resolve this blue access issue.
You can use another memory stick like 1GB in this camera.

Hi,

The picture that I posted shows a TZ3 mode dial. I added a blue arrow to point out an icon on the mode dial.
----------------------------------------------------------------------------------
1. Turn the mode dial on the camera so this icon is selected.
2. Switch on the camera.
3. Aim the camera at your subject, press the shutter button halfway to focus, then press it fully to begin the video. (Just as you would take a picture.)
4. To stop taking video, press the shutter button fully again.
-----------------------------------------------------------------------------------

~When a video starts being taken, its current length will appear on the camera's LCD screen.
~Videos take up more space on the memory card than do pictures.
~If an SD memory card becomes full while recording, then the video will stop automatically.
~Videos can be played back on the camera's "PLAYBACK" mode. They can also be viewed on a TV or downloaded to a computer.

i hav the same cam. its bcoz u lost the thump files

Once you took pictures without a memory card, all pictures taken will automatically be saved on the INTERNAL MEMORY of the camera.
When taking pictures with a memory card, all pictures are just saved on the memory card itself.
If you are seeing 100-757 on the LCD screen. It means that there are already 757 pictures taken from the first time you've used the camera.
It is possible that some of the pictures are in the internal memory and some are in the memory card.

STEPS to DOUBLE CHECK:
1) Remove memory card out of the camera
- Turn on camera
- View pictures on the internal memory
by just pressing on the PLAY mode button
(lowest of the 3 little buttons)
- Pictures seen are just the ones saved on the internal memory

2) Return memory card back in the camera
- Turn on camera
- View pictures on the internal memory
by just pressing on the PLAY mode button (
lowest of the 3 little buttons)
- Pictures seen are just the ones saved on the memory card itself

*** If you want to transfer pictures on the internal memory of the camera to your MEMORY CARD, you just have to follow the steps below:
- Make sure there is a memory card inside the camera
- Turn on camera
- Press on PLAY mode button to view pictures
- Press MENU/OK button
- Keep scrolling to the right until you see COPY TO CARD
- Select YES using the arrow keys
- Press MENU/OK to confirm
* When you've done these steps, all pictures from the INTERNAL MEMORY of the camera will be copied to your MEMORY CARD but it depends on the space left on your memory card

** If still, you could not view the pictures, it's possible that the pictures are really gone when you have transferred the previous pictures to your computer.

** Once you have transferred pictures to your PC, and you have deleted those on your camera, the FILE NAME of the pictures will not start from 100-001 again unless you have reset the file name on the settings of your camera.

In example, i already have 256 pictures on my camera so the filename reads 100-256 for the last picture taken. And then i decided to transfer those 256 pictures to my PC and i deleted those immediately after being transferred. So, as i took another picture, FILENAME will start with 100-257 if i have not reset
the FILE NAME settings to 100-001.

Hope i've helped you enough.

I took a pictures with my camera and now some I cannot view some of the pictures it says Picture error

possible ribbon from CCD image to main board not seated properly

This is a button/firmware problem Canon Customer support will advise on your next move -depending on the age of the camera

Check for corrosion or dirt in your cameras battery compartment.