Casio SI-460 Corded Phone Logo

Related Topics:

Question about Casio SI-460 Corded Phone

2 Answers

Casio SI-460 phonemate executive series corded phone

I have 4 Casio SI-460's and when i try to intercom from any one of the stations it says "unable to call". I have checked and made sure that every phone does not have the DND on and they all share lines 1 and 2. I would understand if it just didn't let me call one phone. But it will not let me call any.

Posted by Amy Seaback on

Add Your Answer
  • jackieo2332 Jul 21, 2008

    the intercom will not work on any phone it says unable to call

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Have you "updated the system" on all four phones? Also, have you set "autoanswer" to on on all four phones?

Good luck,

Scott

Posted on May 15, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have 4 Casio SI-460 and I am having problems turning my auto attendant off. When I put someone on hold, then physically walk to the person to inform them of the call, the person in the other room can't answere the phone. When he picks up the phone the phone just beeps as if the battery is low, but it's not. The person has to come to my room and get the caller off hold in order for him to speak to them. Why is this happening? I have a manual and it saids to do steps 1-3. When I get to step 3, it doesn't allow me to use the soft key on/off button.

Posted on Jan 17, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have the phonemate 2970 answering machine/phone and satellite extension phone. When I turn the sat phone on I get a series of beeps and the HOLD light flashes for about 6 times then shuts down. I...
1. Remove the AC adapter plug from the back of the base unit (not from the wall); leave tel cord connected.

2. While holding down the "set code" button under the cassette lid, plug the ac adapter back into the base. The screen will then display some numbers (110) etc.

3. Hold down the HANDSET keys 1 and 2 simultaneously and then press the speaker button on top within 20 seconds.

4. Press any 3 digits on the handset i.e. 1-2-3.

5. After hearing a BEEP from the handset and base, press 2 on the handset. The base should then say "twenty-five", and the handsets will beep, confirming the new security code is enabled. Press talk or speaker on handset to confirm communication.

6. The time/day stamp and remote access code will be cleared.

7. Best to do this with the answering mach turned off.

8. Restart this procedure if anything goes wrong (may hear a series of error beeps).

I saved my manual and in it I had a fax Casio sent me with these instructions (i had this prob a few times years ago). Good luck!
Read full answer
Jan 18, 2011 • Casio PhoneMate PMP3875BK
0helpful
1answer

Person on other end of phone can' hear me
Hi,
The problem could be coming from the Mouth piece of the Handset. Try to use the Speaker function to check this
- You can also change the Handset
Read full answer
Oct 26, 2010 • Casio SI-460 Corded Phone
13helpful
3answers

Owners manual for casio phonemate TA140. Info on remote access
I have a casio/phonemate TA 140 answering machine but no owners/user manual. Where can I download a copy?
Read full answer
Oct 21, 2009 • Casio Lands Phones
0helpful
1answer

I am looking for a free owner's manual for a Casio PhoneMate Gold Model# PMG-55 HACVC. I can not use all the fuctions on the phone and lights are falshing, beeping and I do not know what to do to stop it....
Sadly, I do not find this manual or guide available at any price. I suspect might be acquired only by finding it in in a box with the phone on some auction site.

It is not on the Casio site. Nor can the manual be found in Google, Yahoo , DuckDuckGo, Dogpile, Itsquick searches. Nor have I found it on several sites specializing in manuals. I have searched for it as Casio Phonemate, Casio Phonemate Gold, and searched for user manuals as images and found nothing but manuals for other Casio products. But perhaps your question will attract the attention of someone with such an item.
Read full answer
May 30, 2017 • Casio Phonemate PMG55SL
0helpful
1answer

WE HAVE RCA EXECUTIVE SERIES PHONES INTERCOM LIGHT FLASING
RCA Executive Series Phone: How do you place the caller on hold and then intercom to another, then transfer?
Read full answer
Mar 17, 2009 • Lands Phones
0helpful
1answer

Casio SI 460
You need to perform a system update on the new phone.

[email protected]
Read full answer
Oct 30, 2008 • Casio SI-460 Corded Phone
0helpful
1answer

Merging 2 siemens gigaset 4215 systems (one base with 2 phones + 2 phones)
If you're trying to get 5 handsets to work with one base, it won't work. The 4215 can only handle 4 handsets, the base handset plus 3.

When I had to replace the base of my 4 handset system, the base handset still worked. Therefore I had an extra handset which couldn't be used. So I decided to buy another base. Now I have 6 handsets which can be grouped 4,2 or 3,3.
Read full answer
Jun 15, 2008 • Siemens Gigaset 4215 Cordless Phone
0helpful
1answer

Auto attendant
I was poking around on the web and found your question. I designed the SI-460 a few years back. Casio, sadly, shut down their phone division.

I can e-mail you the owners manual (PDF) if you need it.Anyway, in case you haven't figured it out:

To turn off the auto attendant:

Press the PROGRAM key.

the display will indicate:

PLEASE SELECT
PNON ANSW OTHER

Press the key under ANSW

The display will indicate:

AUTO ATTND: ON
BACK CHANGE NEXT

Press the key under CHANGE

The display will indicate:

AUTO ATTND:OFF
BACK CHANGE NEXT

Press the program key to end the process.

Good Luck.

Joseph Quevedo
[email protected]
Read full answer
Jan 17, 2008 • Casio SI-460 Corded Phone
1helpful
2answers

Intercom
Each of the six phones must have line 1 connected to the same "subscriber loop" (the same phone number). Assuming this is the case, and that you have not assigned any numbers to the the top six speed-dial buttons, each station will have agreed to be assigned a station number.

From any station, pressing the speed-dial button for another station's station number will page that station.

Now, how to properly initiate an intercom conversation differs between announcing to another station that a call is on hold, or a "cold call".
Read full answer
Oct 23, 2007 • RCA 25414RE3 Corded Phone
0helpful
1answer

Programming tree options are different from what's on the manual
All phones need to be individually programmed to ring on lines one and two, all phones need to have a "system update".

Scott
Read full answer
Apr 24, 2007 • Casio SI-460 Corded Phone
Not finding what you are looking for?

View Most Popular

SI-460 Corded Phone

  • Lands Phones

Related Question

I have the phonemate 2970 answering machine/phone and satellite extension phone. When I turn the sat phone on I get a series of beeps and the HOLD light flashes for about 6 times then shuts down. I...

  • Casio PhoneMate PMP3875BK

Open Questions:

0answers

Reebok Z9 Run - How to exit program mode? We had a visitor use the built in programmed mode and now we cannot use the instant speed keys. The display show "P n" where n is the program number. I haven't ever seen this before as we just us instant speed and inclined manually. I have read in the instructions how to change into Program mode but cannot see how to get back out of it. Am I missing something obvious? Can anyone please help ? Thanks in advance
Read full answer
Be the first to answer Jun 13, 2022 • Advance Lands Phones
0answers

line 2 not working on my Panasonic KX-TG4500
Read full answer
Be the first to answer Jun 04, 2022 • Panasonic KX-TG4500 Phone
0answers

no dialling tone on C570HX
Read full answer
Be the first to answer May 24, 2022 • Lands Phones
0answers

Panasonic PBX (KX-TES824). Having an issue with outgoing calls from the extension line, calls going to the wrong numbers. Panasonic PBX (KX-TES824). I have 2 CO Lines and 8 Extension Lines including the KX-T7730. Having an issue with outgoing calls from the extension line, calls going to the wrong numbers. However, calls are going to the desired number from KX-T7730.
Read full answer
Be the first to answer May 09, 2022 • Panasonic Lands Phones

See all Casio SI-460 Corded Phone Questions

Related Topics

564 views

Ask a Question

Usually answered in minutes!

Popular Questions

Need manual or basic info for use of the CASIO Phonemate 3700 answ.machine.

Casio PhoneMate PMP3875BK

Owners manual for casio phonemate TA140. Info on remote access

Casio Lands Phones

Why won't my se-s700 print with ink? Feed key works, everything else still works, just seems like I'm out of ink?

Casio TE-2400 Electronic Cash...

User manual

Casio PM5800 Cordless Phone

I have a Casio PhoneMate TA-105. Old machine and

Casio Lands Phones

Top Casio Lands Phones Experts

Eric the half a bee
Eric the half a bee

Level 3 Expert

36751 Answers

Tom Chichester

Level 3 Expert

62329 Answers

Don A
Don A

Level 3 Expert

3289 Answers

Are you a Casio Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...