Pc and communication with printer

install the software before connecting the printer usb cable. the nonly connect it when the software asks you to.

your wirless device is damage please use usb wirless

if you can connect to your wirless AP from other devices such as mobile or other laptop this means that you have to check the following:
1- delete then re-create your wireless profile .
2- make sure that your wireless adapter is cofigured to obtain automatic ip address not static.
but if you are not able to connect with other devices , then make sure that you have the correct security password (if any) or check the configuration of your Access Point.

The Canon is trying to connect to a wireless router or wireless access point which is connected to your computer network. Your Sprint 3g device is a wireless broadband device for Internet connection and cannot connect to the Canon using this device.
You need a wireless card that connects to the wireless router or wireless access point.
Otherwise you can connect to your printer using a printer cable.

I think you may find that, as in my HP Printer, the Wireless through my laptop has to talk to my Broadband Router which in turn talks wirelessly to my printer.
You are right, wireless and WI FI are slightly different standards.

Hi! you must share the printer with that machine witch is directly connected to printer.

if you are on a network just Add printer and but you will need to install the drivers on the laptop so it can communicate with printer via network

Make sure your usb cable is properly connected. Turn your printer "ON" only when during the installation say turn it "ON" or when it starts searching for the printer. Good luck!

is the printer connected to a router or base station wirelessly?

hi,
u need to have wireless internet connection, first uninstall the printer sw, while reinstalling choose wireless install, follow inst, connect the printer, configure wireless adapter by choosing the correct wireless nw and by entering the security key(WEP, WPA), if wireless adapter not detected then, unplug all cables from back of printer,removed wirless adapter, press power button for 20 secs without any cables connected, connect cables, restart printer, connect the wireless adapter, u will get msg nw card detected, then try reconfiguring by entering the correct keys, in case if u dont know the security key contact ur internet service provider, once correct details are entered it will configure successfully, unplug usb cable from printer and pc, install printer sw, issue resolved, if there is no communication then check the firewall settings, anything relating to printer give full access, restart pc, try printing,

ps: if usb cable is connected to printer the nw card will be disabled.