Press and hold the SOURCE button until the unit turns off. Press and hold the FUNCTION button, until display pops up, then release. (If you do not have a FUNCTION button, then push the AUDIO button) Press the FUNCTION button again until the clock shows on the display. Press the UP and DOWN buttons to adjust the hours. Press the LEFT or RIGHT arrows to move to the minutes. Press the UP and DOWN to adjust minutes. When complete, press the SOURCE button to exit.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if all you need to do is get the cd out there is a small hole in the foront of the unit just big enoufe for a papper clip just stratien one out and put it in the hole but if you want to fix your unit then you will have to take the face plate apart get the soda out of the face plate i always use glass cleaner and cotton swabs for this just make shure you get any and all residue off before you put it back togethr and make shure you clean the rubber pads under the buttons and you should be good to go
The constant power (yellow wire) needs to be connected to an unswitched +12V source. It sounds like that's either unconnected or you've connected it to a switched power source.
don't know how to set the clock
×