- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I think you need a Toyota garage to sort it out.
I presume you jumped off the correct battery and the engine was running when you jumped the other vehicle.
Same problem! The machine is unable to start and the display flashes without starting up. It seams power suply's fault but... when i desconected the display ribon cable i could be able to startup the machine! I read the manual to know what buttons to push (without the display), and the washer started without another problem than the absence of a display! I believe the answer lives in one of two chances: 1) power suply fault - probably a capacitor; 2) display module fault - it drains to much current.
if anyone finds the answer, please publish it!
thanks
All these sound like good advice but in addition - there is a re-set button on the back of this machine, push it and see if the problem continues. If you still have the same problem after re- setting your machine please call their customer service line at 0345 640 2020.
Code 52 is a loss of water during recirculation cycle. Possibly due to a faulty divertor valve. Check to see if water is circulating back into bowl & no water escaping out of the drain hose. May also be caused by a faulty motor controller.
The pump is at the lower left of the front of the machine covered by a white plate. Use a bowl to catch any remaining water when opening the screw thread inside and then clean and replace. If it is truely beyond repair then a new filter pump can be bought from ebay for £3 or thereabouts.
I have just drained mine manually in this way and am going to run it empty with soda crystals to glean a few more days use whilst the new pump arrives.
×