Hi, Could you help me. My HP 2410 gets stuck in a cycle when booting up. It just goes on clicking. Have tried rebooting, all the usual tricks
When you power on the printer.
See if the scanner light move to the right and then keep on clicking.
If this happen, the scanner head is unable to find home position.
You will have to clean the strip under the glass.
If this only start to happen recently, you could unplug the printer and wait 1 hour.
Replug in the printer will at times stop the clicking.
You can go to http://h10025.www1.hp.com
Enter c00553775 into the search block.
Click on Hp All in one how to clean scanner glass.
This will bring you to the HP document.
485 views
Usually answered in minutes!
Thanks for your help - the problem was not with the scanner but you were right about leaving it for a while. I had tried to cycle the power several times without success. Eventually left it for some 5 hours and on retrying it booted up without problem. The weather is unusually hot so maybe it needed time to cool down. Again thanks for the advice.
×