It will not boot up. It will come on for 3 sec. and then the screen will go blank.when you try to turn it back on it will come on and go blank again. when you plug it in to the computer it shows up as charging but wont come on .please help me fix it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You might try a hard boot, hold power button 5 sec. then as it reboots use one of the function keys to get into the bios. Usually F2 or F8 or F12. Start in safe mode then check you resolution setting and make sure you video card drivers are up to date. Good luck.
You corrupted your settings. Turn on the Ps3 let it power cycle, once you get to the blank screen hold down the power button until it beeps 3 times (about 25 secs) Your ps3 will shut off( note: if you have HDMI only, plug in your RCA connections as this will reset your ps3 display to analog) once you are back at xmb, plug in your HDMI and go to display settings and select HDMI. Always let your PS3 do its thing before shutting it down, its equivalent to unplugging your computer instead of logging off correctly.
try with restarting computer & press F8 at the same time. u will see a menu where choose "safe mode" & start the computer. in safe mode see the display properties, set the refresh rate & resolution according to monitors specifications, apply & restart again. if that does not work, replace the main board of lcd monitor.
try with restarting computer & press F8 at the same time. u will see
a menu where choose "safe mode" & start the computer. in safe mode
see the display properties, set the refresh rate & resolution
according to monitors specifications, apply & restart again. if that
does not work, replace the main board of lcd monitor.
This looks like it can't recognize the hard disk or it's empty - no OS. To check that it's not a hardware fault just boot from a Linux Live-CD like http://pclinuxos.com/
If the hard disk is there and with all the data apparently intact then most likely the MBR was corrupted, fix it.
Have you tried this: 1. After removing the battery 2. Press and hold the power button for at least 10 sec. 3. Put back the battery 4. Turn it on
if this doesnt work, there could be a problem with your operating system. Try accessing safe mode if you can login .TAP F8 continously on the dell logo screen, and it will open advance boot options. (Just select safe mode) If safe mode boots properly try running system restore to restore it back to the previous date where your computer is still booting to windows. Hope this helps
hard rest factory default settings = when ur set is switched off press
both buttons call and end key and then press power button on upside of
pda for like 5 sec screen will appear asking to format all data take
out ur card if u dont want to format that now confirm by pressing the
centre action button in 4 side joystick and go
if ur pda boot normally after reset procedure it will take some time to boot dont panic if it is ok then good luck
if it doesnt help then then go to www.htc.com and upgrade ur ROM