- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
enter wrong passwords 15 times....it ll ask PUK number....now call ur customer care and as the puk number for ur phone number...they ll give u.....now just enter the puk n unlock the mobile...
hope it helped u!!!!!!
If you do not remember the password for your privacy lock / phone lock then you will need to master reset the phone and that will reset the password back to the default password 00000000 (eight zeros). Please follow the steps below...
Steps to Master Reset the GSM Phones to company default settings NOTE: Following the steps below will delete everything from the phone memory like contact numbers, images, music, messages.
1. Switch OFF the phone and take the SIM card out.
2. Switch it ON without the SIM card, the phone will say “insert SIM card”.
3. Enter the code *2767*2878# and wait for 10-20 seconds until the phone restarts automatically.
4. Now the phone will say “insert SIM card” again, put the SIM card back in and switch it ON.
I was given an old computer years ago that was password protected I was told to pull the battery out for 10 sec. then reinstall it. It cleared the pass word protection. Note: pull the power cord push the start button to drain any power from the system, ground your self to protect the computer of any static electricity first.
Basically first do a Full Reset (this is deletes Everything saved on the phone; But this is isnt the firmware so its safe) Then insert whatever SIM card you want and type in NETWORK (*#9998*638)... your phone will freeze for a sec (this is normal) and the restart... youll get a message saying "Please Wait..." and then you phone is working
NOTE: The NETWORK (*#9998*638#) code has to be typed in every time you start the phone
MY o2 j600 (J600AYGF1) was "Phone Locked, Return to service" and then i used this code and it was fine... My j600 is now back to normal by typing #0111*RANDOMCODE# and the incorrect password message came up and tyhen worked !!!!!!!!BUT PLEASE DONT DO THIS COZ IT WAS LUCKY!!!!!!!!
there is no way you can reterive your password...you need to hard rest your pda usnig camara+recording button+power button and reset it with stylus....but you will loose your data stored on phone.....bet data on storage card will be saved........
All the Best.
Was this solution helpful? Show your Appreciation by rating it and if your problem is solved. Please vote .. FIXYA..