Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

1 Answer

RCA D52W20 WHEN I TURN ON THE TV IT IS BLURRY. CAN YOU PLEASE HELP ME TO ELIMINATE THE BLURRINESS SO I CAN HAVE A CLEAR PICTURE? THANK YOU.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

Check for smooth,accurate adjust of RGB focus located up front behind speaker grill.If jumpy or inaccurate,replace RGB adust block.If that is not the cure,you may have bad CRT(s).

Posted on Oct 09, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blurry picture on my 70" vizio


As previously mentioned, try a known good DVD to the same connection (BE SURE TO USE A DIFFERENT CONNECTING CABLE,as your connect cable may be at fault) Also try any of your other inputs to the TV to eliminate 1 or more input issues.

Mar 21, 2014 | Vizio L32 32 in. LCD HDTV

1 Answer

I have a Olympus C-750 UltraZoom. I was taking pictures and everything was normal, but then I noticed the viewfinder was blurry. I was walking through a tunnel under a river and I thought the temperature...


Hi Steve, I inform you that the problem only is moisture. Please follow this.
1. Put the camera in sunlight for few hours. After that use it & if you face same problem then
2. You need to visit camera repair shop and they open the camera completely and clean all the inside part of the camera. because you need to clean the moisture inside of lens, viewfinder & sensor too.
So only hope in sunlight. If its solve then fine.

Jan 21, 2011 | Olympus Camedia C-750 Ultra Zoom Digital...

1 Answer

I have a Toshiba 65H82 and at first the picture was blurry but would clear up after about 10 mins now the picture just stays blurry. Can you tell me what the problem could be and if it is worth fixing it?...


Hi,
Try adjusting the focus block this requires opening the back and front bezel of the TV. If it doesn't clear up after adjustment attempts then the liquid coolant inside each of the tubes need to be emptied and refilled with new coolant. Over time the coolant gets cloudy and can cause a blurry image with a white sheen. Contact me at the link below so I can help you further.....if this helps please rate:-)

Thank you:-)
http://tvtechwork.webs.com/

Oct 21, 2010 | Toshiba 65H82 65" Rear Projection...

1 Answer

Help with settings - blurry SD picture


contrast full, brightness, tint, color, in the middle, then adjust sharpness for what suits your eyes, you may turn brightness and color below middle.

Mar 17, 2008 | Sony BRAVIA KDL-40V3000 Television

1 Answer

Picture blurry


What was replaced by the repair shop? The blurriness may be out of focus. If so, the focus is controled by the flyback transformer. That connects to the picture tube at the top (anode cap).

C-Dog

Feb 13, 2008 | RCA F36450 36" TV

1 Answer

WD-52525 too much green and picture is not clear...what can i do to fix it


. Suspect the FMT PCB part # 930B924002. Supect the DM PCB part # 934C116002 if green tint

Aug 04, 2007 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Dim and blurry


try adjusting the focus control located on the flyback of the tv. good luck

Jan 31, 2007 | GE 32GT740 32" TV

1 Answer

Picture is blurry


it sounds like the focus block or flyback is bad.sometimes you can put nail polish on the adjustments controls to make it stay.usually they are marked from the factory with white marks check and see if they are aligned.but be sure somebody with tech-skills help you.the flyback usually has a screen & focus control.(the big red wire to the tubes or block)

Oct 06, 2006 | Zenith Z46Z83D 46" Rear Projection...

1 Answer

DSC-T7 Blurriness


Try this test: Mount the camera on a tripod or set it on a secure base and use the self timer to trip the shutter. Doing this will totally eliminate any possibility of camera shake causing blurriness. If the picture is still blurred then there might be a problem with the AF but if it isn't blurred then the problem is either camera shake OR subject movement (or both).

Sep 12, 2005 | Sony DSC-T7 Digital Camera

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...