Have you connected the right cable into the right slot cause that happened to me and then i found out it was in the wrong slot try that and is it didnt help then plz say
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
RF cable coax out to TV from the RF Modulator .....RCA jacks "red-yellow-white from ps2 to RF modulator "its not called a converter box"//lol Put the TV on channel 3 you should see the ps2 screen. Same way you would hook up a DVD player to a CRT TV..heres a video TVs DVD Players How to Connect TV DVD Player VCR With Modulator
You need what is called an HDMI switcher. It will have one input and two three or four outputs. As many as you need. When you switch devices you just need to hit a button. You can find one of these online or maybe even at a big box store. If you have problems or need to get one ordered message me back or check out our FB site at Connectors Audio and Video Services.
New tv's don't use dead channels like 00 anymore for there inputs.. They use sources to change from different inputs.. Make sure you have your ps2 hooked up into input plugs on the tv and then turn it on the ps2 then look on the new controller for the tv & find a button saying source .. Press that until you see your ps2 on the screen. If not check your connections try again.
It is possible that the RCA cable is no good. The yellow = video, the red and white = audio. The input on the TV may be bad, try switching from one input on the TV to another if you have one available. Even if you don't have a free one, remove a DVD player or something else that may be hooked up and try to hook up the Playstation to that input using those RCA wires. This way you can eliminate the port and the wire being bad at the same time. If all else fails and the PS2 works on other TVs, the only option left would be a problem with the TV you are trying to hook it up to. I have that problem on one TV I own, one of the RCA inputs (input 4) is no good. I hope this helps.
you need to hook up the ps2 directly to the tv not the converter box the converter box is only for digital Chanel's that will go off air on june 12 but if you have cable or satellite then you don't need a converter box this is only for free Chanel's with they don't requires subscription to cable or satellite your playstation should work with out the box try to hook it up directly to the tv not the box
Ok if you want to hook up RCA cables to that TV and dont have a adapter you can buy a RF MODULATOR ( Wall-mart / radio shack for $20.00) and use that to conect to TV and the ps2 will connect to that ( this will also let you use a DVD player with the TV!)
Instructions in RF package!
PLEASE RATE THIS RESPONSE AND HELP KEEP THIS SITE FREE!
THANK YOU!
USE a VCR between the PS2 and the Sylvania TV. Hook the PS2 A/V cable RCA connectors( Red, Yellow, White) to one of the the Video input RCA connectors( Yellow, Red, White) on the VCR. Hook the VCR Cable output to your Sylvania Cable input. Set the Sylvania Tv to channel 3 or 4. Set the VCR channel to Line 1 or Line 2. This should work. I hope it helps you.
×