IBM Wheelwriter 3 not printing letters ( keystrokes)

Print hammer selenoid cap is broken, or print hammer selenoid is gummed up.

I assume it churps on each keystroke. Try code "S".

DickyO

The print solenoid cap is probably broken. We sell them for 20.00 including instructions and shipping.

DickyO
Cleveland business Machines
216-241-0027

The selection motor bearings just right of the print solenoid get dry a little WD40 on the front and rear bearings usually takes care or this.

DickyO

Tou probably need a print solenoid cap.

We sell them with installation instructions and shipping for 20.00.

DickyO
Cleveland Business machines
216-241-0027

http://www.lexmark.com/publications/pdfs/2007/typewriters/Wheelwriter-30.pdf
Hold down the CODE key and press the s key to turn off sound.

You can try code I to increase the impression but probably the print solenoid is gummy or the plastic solenoid is broken. We sell the caps with installation instructions for 20.00 includes freight. DickyO Cleveland Business Machines 216-241-0027

You need the plastic on the print solenoid.
We sell them for 20.00 including inst. & handeling.
216-241-0027

DickyO

Probably the plastic cap on the print soleniod is broken. They are available from us for 15.00 but a little tricky to install.

DickyO

Most likely the plastic cap on the print solenoid is broken they are available but are a bit tricky to install.

DickyO