- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Technology changes at a high rate of speed, as we all know. And High Definition (HD) has come a long way in a very short period. Since your television still works perfectly otherwise, I don't think that it's a problem with the set itself. It may only be a victim of technology.
Does this only happen with High Def channels? Does it happen every time you change to another HD channel? If you answer 'yes' to either of these, it is most likely due to the television's processing capabilities. Because of the high amount of data that is required to deliver HD content, manufacturers have found creative (but not necessarily convenient) ways of dealing with the processing issues (blank screen delay for example). Since the audio and video signals for any given television station (either HD or regular) are transmitted separately, the television has to process that data internally so that you get the picture and sound aligned properly when you are watching it. HD broadcasts are much more demanding than regular stations requiring manufacturers to constantly improve this processing speed with every new model. On some televisions, the channel remains blank for a few seconds to allow the television to configure all of the information so it looks good when it's ready, which could explain the delay you are describing. At the time your television was manufactured, this may have been the best technology your manufacturer had to offer. On my personal flat panel, I get the picture and sound right away, but I have to wait about 15 seconds for the sound to catch up to the picture which I think is more annoying than being forced to look at a blank screen. But that's just me.
hmmm . you better check on that before firing it up ... normally the colored wires are for different speeds .. only one speed can be connected at a time .. usually the high speed winding is used for air conditioning and a lower speed winding is selected by a relay for heating .. ... the way the capacitor is hooked up determines which way the motor will turn .. your old motor with just 3 wires was probably a single speed motor .. normally the black wire will be connected permanantly to one phase .. the other phase then goes to the selected speed winding (color of wire) .. one goes to the starting capacitor . the others even if not connected will be hot electrically so need wire nuts to prevent shorts ..
Hi, Make double sure that your CPU isnt overheating , Your PC Turns off when it detects your CPU getting too hot , so it wont overheat and get damaged....Try using Realtemp or Speedfan to check your CPU tempreture.. Hope this helps bud Happy new year :)
unplug everything from your laptop unplug the power from the laptop close it and turn it over remover the battery open and hold the on button(battery is still removed) for a 10 count, replace the battery
turn on you can plug the power cord if needed the prob. should be fixed