How do I change the date on my Sharp OZ 590A PDA

For some reason I have a CD that is labeled "Sharp Software CD-ROM OZ-590/ZQ-590". Could this be what you are looking for?

PS - I never owned one so I dont know why I have it.

hi firned

try old version of outlook express try to install your software

If the pda was made in 2005, it's likely that there is a small watch battery somewhere which saves your settings, date, time, etc.
If this "CMOS battery" needs to be replaced, you're probably losing all of those basic settings whenever you let the main battery lose too much of a charge.
Hopefully, it's easy to access.

you can try this http://www.sharpusa.com/products/TypeSoftware/0,1086,79,00.html

press ctrl+alt+del at the same time to run task manager.click on processess and click on the process for the programme running and end task.click on yes.then try to uninstall it.dont end any system task.

I DON'T KNOW HOW TO GET INTO THE GAMES N ALL

have you placed the switch on the back to normal operation

Turn on your organizer and touch the Clock Icon with your stylus. Just to the right of the bold heading on the top of the screen is a downward arrow. Touch the arrow with your stylus and a screen should come up with with six different modes of your choice. Touch the Home clock. Now touch the Edit on the bottom right hand corner of the screen. Touch the left solid arrow on the bottom of the screen enough times to bring you to the Country at the top of the screen. Touch the solid up or down arrow until you come the USA. Touch the solid right arrow unil you see the USA city field. Now touch the solid down arrow until you come to your city. Touch the solid right arrow once and the hour should be highlighted. Enter your hour. Now touch the right arrow to enter the minutes. Continue with the right arrow to fill in all the values and touch am or pm. Finally touch save or enter. The little smilly face is for daylight saving time which is touched on in the summer time. Hope this helps you, [email protected]

I found some similar problems which led me to this site: http://www.outlookcode.com/jumpstart.aspx also read: http://www.fixya.com/support/p372380-sharp_wizard_oz_590a "You are not alone"

Uninstall all the software you just installed and do not connect the usb device until you again run the install from OZ-590A CD. When it does not find a USB device then connect USB and it should detect it. If you don't do it in that order you won't get a connection. It should come up on COM7.