Where can i find the fuse of catridge for Samsung ML 1640 laser printer in India?

Solution For Samsung Printer scx-4300 ml-1640 ml-3310nd scx-4521f
catridge reset solution contact-09040653885 navanath meher

need for samsung ml 1666 chipre set software

Hello,

For solving your problem, remove the tone catridge from the printer safely.

Refill the catridge from the "Service Persons" available near to you.

Place the catridge, and check.

Let me know that i Fixya the problem.

Yours
B.Krishnamacharyulu

Driver download link: Samsung ML-1640 Printer Driver

Hello,

Here is the support page for your printer:

Samsung ML-1640 Support

You can download drivers, manuals and firmware and there are other links to help you.

Thanks for using Fixya.

You have software to reset ml 1640 printer, you can use refill toner.

www.nakshatraworld.com

have a samsung ml2245 laser printer. using the printer tonner catridge refilling But Is Not Working can you have aney help me

pls give the patch file for reset the samsung monochrome printer ml-1640 printer.so printer count reset problem.give me a service support from your side.

http://www.fixyourownprinter.com/forums/printer/59558

RESET . Open the cover on the back of 1640 and see to small board . There is a m/s 93C66 near a big chip . Turn OFF the printer , connect pin 3 and 4 of 93C66 and turn printer ON . Hold on connected pin 3 and 4 of 93C66 until lamps on the front panel light , when lamps end light disconnect pin 3 and 4 of 93C66 . Now the page counter is 0 , and starting cartrige will work . May be different time between lamps on front panel OFF and disconnect pin 3 and 4 , it is about 0,5 sec , but may be larger or smaller , may be you will need to do this sequense once more . This method works if page counter before  RESET not more than 2000 pages .