Toshiba 57H82 57" Rear Projection Television Logo

Related Topics:

Question about Toshiba 57H82 57" Rear Projection Television

2 Answers

57h82 I am looking for a service manual link for the 57H82 to replace the caps on the hyper pcb board. I have a problem with wavy picture when you turn it on until it warms up. I noticed a few people resolved there problems with either replacing the board or replacing the caps. Any help would be great!! Any link to part numbers for the caps would also be great!! Thanks

Posted by john lebiszczak on

Ad

2 Answers

Colonel Rommel

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

FYI, it turns out that the service manual doesn't have any schematics or otherwise board level reference to the hyperboard. It only refers to it as a module that can be replaced. Nothing more.

Posted on Jul 17, 2007

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

Heres your link for the capacitors http://www.mcminone.com/search.asp?keyword=surface+mount+capacitors&btnSubmit.x=8&btnSubmit.y=7&btnSubmit=GO Loads of info here about the board http://www.techlore.com/forum/thread/15237/Toshiba--Model4283--picture-is-zig-zag./ Good Luck

Posted on Jul 17, 2007

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Toshiba 57H82- Distortions on the picture screen

You have leky caps in your regulated power
supply they are typ 220 uf 200v and are large
and round next to flyback
0helpful
1answer

Toshiba 57H82 problems

Val,
It's sent via Pando and you should get a link to it in your mail. To open it you'll need Pando, it's a free download if you don't already have it... The hyper module on that has about 10 caps that are common in that failure. If you need anything off board don't hesitate to ask.
Bill
William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993
[email protected]
0helpful
2answers

Service Manual

Jimmy,
Will send it out post haste... But be VERY careful inside the hyper module you can easily lift the traces when trying to remove the smd caps and ruin the module beyond repair...
Just send me a private mail and I'll return with the service manual.
Bill

Premium Technologies
[email protected]
1helpful
1answer

Toshiba 50H82 hyperboard caps

Service manual won't help much in the hyper board and that's likely the problem.. Simply remove the hyper board and open the can. Inside you'll see a number of smd caps. There are 11 10mf/16v that need to be replaced...
Bill
0helpful
1answer
0helpful
1answer

Toshiba, 57h82

Hire a skilled,senior tech willing to rebuild your board....
replace all bad caps.......good as new.................T.
2helpful
2answers

Tv only watchable through component Toshbia 57H82

this is a known problem with these toshiba tv's, they will do nothing to help you we should form a consumer group and complain to Washington! The part that needs to be replaced is a hyper pcb,pd0637and is available from Tritronics, in Miami Fl.phone #1-800-365-8030.the part cost me $263.00
0helpful
1answer

Wavy picture on all video inputs except component video toshiba 57h82

make sure you replace all the 10uf caps and that the connections are good....
0helpful
2answers

Toshiba 57h82 replacing caps on hyper board

trace them with a continunity meter and all will be ok...
Not finding what you are looking for?

206 views

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76843 Answers

Cindy Wells

Level 3 Expert

6474 Answers

Ekse

Level 3 Expert

13435 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...