When I turn the camera on The LCD is fine and it shows everything fine but the lens dose not work and when I turn It Of the shutter dose not close and the lens dose not go in all the way.
Please Help Me It Cost Me $400 and I don't Want to have that money wasted
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Take the batteries out of the camera and let it sit for around an hour. Turn your dial to "set up", then put the batteries back in and turn the camera on, it should ask you to reset the date and time on the LCD. If it doesn't, your camera is essentially dead. Buy a new Panasonic FZ35 if you can afford it. Best All Around Camera I have ever had including the more expensive SLRs.
This problem is frequently due to corroded battery terminals inside the
camera. Remove the batteries and wipe the terminals with a soft cloth
(heavy corrosion may require a fine wire brush, steel wool, or
sandpaper). Remove any residue left in the camera by the cleaning.
Clean the terminals on the batteries in the same manner, and then
replace them in the camera. This cures most problems, but if it
doesn't work for you, check the Kodak troubleshooting guide at:
The tech support person, Hemantraj, asked good questions, and determined that the camera needed a CCD imager circuit replacement. He suggested that I contact Kodak directly about repair. I did, and have mailed the camera to Kodak for repair. Thanks for your help!