Question about Siemens SpeedStream 4200 (13A4200001) Bridge

Cant connect my router

I bought a d-link router and somehow it cant connect to my existing modem. i'm trying for a wireless internet connection in my home. they say that my existing siemens speedstream 4200 modem is not compatible with any router so do i need to change it? i have a high speed internet connection. thanks

3 more comments
tessa marcelo Jul 18, 2007

i hav a DSL, connection i hav a DSL, connection
maplesyrup89 Sep 23, 2008

i have pretty much this identical problem, my modem is a siemens 4200 my router is a d-link DIR-300 and i have broadband internet via DSL.

i cannot conet my modem though the ethernet cable for some reason it has to go through USB or else it wont register and i think this may be part of the problem. please help
bogan1 Nov 28, 2008

I have bought a D-Link wireless G Router( DIR-300) and I cant figure how to connect it to my modem( Siemens Speedstream 4200). I am trying to set up a wireless home network. The cd that came with the router wont work in my pc. On the modem there is only 1 spare port which is a blue USB. The router came with a blue ethernet cable. I am connected with Optus ADSL through the phoneline. Can anyone help?
Anonymous Jan 04, 2009

Same problem, Im sure it has something to do with the config of the Speedstream modem.
Anonymous Mar 17, 2009

I have the same problem

I have just brought a DIR-300 and cannot get it to connect to the net, I have set up the DIR-300 and even can ping it from the PC, but the ping does not reach the modem( speedstream 4200).
I have read some other pages and they say that the DIR-300 has to be set up as a bridge with the modem but none so far i have found works.
I believe it might be something to do with the PPPOE ( or something like that), i have even tried the DCHP setting, but still to no avail. Again this is OPTUS ADSL2+ i think( could be mistaken though).
Its getting close to the stage where the Wirless router is going to be taken back, Easy set up my Arse!!

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

He said it was adsl

Posted on Oct 19, 2008

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

What is the source of your connection thru telepon line or a broadband connection or DSL?i need to know this........

Posted on Jul 18, 2007

1 Suggested Answer

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

3G usb modem wont connect to internet through wireless router

Sure you can that. 1. you have new internet connection. need to configure the router according to internet connection type. it could be manually ..
2. set the wireless settings on the router again manually.
then try to connect the router.

If you need my help
the send me some information about the network.
1. when you connect your pc to modem what ip address you get.
2. what ip you get when u connect your pc to router. make hard wired in both condition.

and possible send me your email add.

Dec 23, 2012 | Computers & Internet

1 Answer

I can connect to my di-614+ through wireless connection but i don't have internet access

sounds like the router and modem arent talking what kind of internet connection are you using and have to tried accessing the internet with the ethernet cord that runs from the modem to your computer. if you cant access the internet with that direct connection to the modem you might have a bigger issue

Mar 21, 2011 | D-Link AirPlus DI-614+ Wireless Router

1 Answer

My ISP gave me a USB modem(Wanadoo ADSL) which i connect my telephone line and a USB to connect the modem to my pc.I bought a D-link DIR-825.Do i connect the telephone line directly to the DIR-825 or i...

Plug the modem filter in the wall, plug the modem into the filter, then plug the router into the modem. From there you should be able to set up your network or personal internet.

Mar 12, 2011 | D-Link DIR-825 Wireless QuadBand Router

1 Answer

Recently my D-link has lost its connectivity, oddly my Mac computer can pick up a wireless signal and access internet while any other wireless devices fail to acquire internet. I tried a cable connection...

Hello, Looks like your Mac might have connected to some other unsecured wireless network in your neighborhood. First connect any computer directly to your modem and check if you are able to go online. If the "internet" light is not lit on the router then there is no way your Mac can access internet through the wireless signals of that router. If you do not have internet connection through your modem then contact your internet service provider. If you are able to go online through your modem then perform the following steps..
1) Disconnect the power from both modem and router wait for a minute and connect the power back for modem first and after ten seconds connect the power for your router. Now once all the lights are stable check if you are able to go online through the router. 2) If the above step didn't work then you will have to reset and reconfigure your router. You will see a small reset button at the back of the router, press and hold it for 10 seconds and let go of it( while power is connected to the router) now disconnect the power from your router and connect it back after 10 seconds. Once you have done this you can reconfigure using the disk provided with the router by re-entering the ISP information. 3) Once this is done check if you have any firmware update to your router by logging on to the router vendor's website and entering your product details.
Hope this helped..!

Mar 09, 2011 | D-Link DIR-655 Wireless Router

1 Answer

Hi i bought the smc wireless router and i tries to connect it but i couldnt figure out how to connect it because i have a laptop and my internet is connected from my modem to my laptop but i cant seem to...

I'm unsure of the exact part number here but using the model number I checked the manual. This looks like it's just an access point which extends a current network you have. If you only have your laptop, this device and your internet modem it may not give you the wireless connectivity you're looking for. On a normal setup you would plug your modem into a router, plug your laptop into the router and set it up with all your DSL/Cable connection information as well as wireless on/off. You can then unplug from the router and continue life. with this one it's only connecting to an existing setup (another router or another wireless network) and extending it.
If you are looking for a solution to give you a router that connects to your modem and gives you wireless or adding multiple devices on a single connection I would recommend returning this and getting an all-in-one router such as this: http://homestore.cisco.com/en-us/Routers/Linksys-E1000-Wirelessn-router_stcVVproductId97826160VVcatId551966VVviewprod.htm?icid=linksys-specs-e1000-learnmore-btn&src2=linksys-specs-e1000-learnmore-btn

Mar 07, 2011 | SMC EZ Connect g SMCWEBT-G

1 Answer

My company provided me wired internet using Paradyne 6381 wired modem. it works fine. I have D Link 2640 T wirelss modem + router available with me. Please advise me how do I connect available D link 2640...

Since your D-Link 2640 is a modem + router it may not work the way you intend.

You need just a wireless router without modem.

Run a small Ethernet patch cable from your Paradyne modem into the WAN port on your router, you can plug your existing Ethernet cable into one of the other LAN ports on the router, then access the router setup using the computer connected to the Ethernet cable using a browser and putting the router's IP address into the address line of your browser. It will most likely be 192.168.0.1 or 192.168.1.1.

Once you have configured the Wi-Fi router you will have your wireless network. Full instructions should come with the router.

Routers are available for as little as $29.95 but expect to pay closer to $79.95 for satisfactory speed and capability.

Oct 23, 2017 | Paradyne ADSL/R 6381 Router (6381-a2-200)

2 Answers

Installed this router behind my DLS 2wire gateway modem. I cant seem to get any of my D610 wireless laptops to go to the internet

make sure you pluged the ethernet cable from the modem into the port that says internet

Feb 11, 2010 | Linksys WRT160N Wireless Router

1 Answer

How to connect ADSL 2 modem to Wireless Router

just change the ip address in the router and give the proper settings in the router

Apr 03, 2009 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

Modem and wireless not talking

If u r inside a wireless network and internet is ok, u will able to ping both the wireless router gateway and modem gateway. If u cant ping the modem gateway, u can try connect the modem directly to your pc, and test again. U need to make sure the modem is OK, and able to connect to internet. Then only u move to check router. This is due to very often internet access having problem.

Mar 10, 2009 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

How to use this unit as a Access Point for an existing Wireless Home Network

set the second router through the web menus to a different ip address, cant have 2 devices on the same (default) 192.168.0.1 address, try 192.168.0.2 (example only) to stop data collisions
connect by cable secondary router lan port 1 to the primary router lan port 4 (any lan port to any lan port),
drag secondary router upstairs on its cable and install it wherever you want
set two routers on different channels.
set all wep settings on both routers the same.
set all pcs to 'auto channel' select
wireless adaptors in pcs will then select strongest signal at any point and transmit thru that router

Feb 15, 2008 | D-Link AirPlus DI-614+ Wireless Router