- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You're unit has three color gun inside, the red/blue/green gun, since you haven't a green color, green gun is dead. This is caused by faulty resistor, tube, transistor, bad solder joints. If you have necessary tools and test instrument look first for bad solder joints in the neck board, re-solder all cold/dry joints, unplug then re-insert all cable connected. Test the parts in that board and also the tube.
If you can't do the job yourself I would advice you to look for a technician to isolate the problem.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.
Verify Model # off back of set and mo / yr built......critical for
correct solution....For example, if your # ends with.....13, then
a DM module repair will be needed...replace four capacitors...
1000mf 25v 105 degree.....If different model = different solution