IMac dvd don't work

Is the SanDisk showing as a drive on the Imac? You should be able to drag files from the Music folder to the Sansa player to copy them. (You can't connect to ITunes and download directly to the player.)

I hope this helps.

Cindy Wells

Make an appointment with your closest Apple Store Genius bar. Take your iMac into them to diagnose your problem.

Your machine has a DVD-rom drive, but not a DVD-burner. There is a difference.

Basically, you can read and play the DVD's, but the drive is not capable of burning them.

it sounds like its being a webcam.on the camera press the PLAYBACK button/switch so its not a camera anymore

If it's usb go for it...I don't see why it wouldn't...however the programs that are on your floppys may not open right or may not open at all...depends on what programs you have on the mac...

Sounds like you blew your power supply.

The only way to change the password is to have a system disk which you could pick up on ebay (Snow leopard would do)

Hi,
Welcome to Fixya. You don't need a driver since the mac computer was able to recognize the DVD and CD's. If you want to use the DVD writer to burn images on a blank cd you need to use a burning software. Can you please try use the software below and see it if will work.
Burn Software for Mac
Please let me know if this will work or not so that we can continue troubleshooting. Thanks

If the buttons on the case are working but the buttons on the remote don't then it's clearly a fault with the remote.
Each button in the remote is made out of 2 wires on the electronics board that are joined by a small patch of conductive paint situated on the rear of the rubber button. If something gets in there, like water or dirt or the patch flakes out, the contact is no longer made and the button no longer works. The remote will have to be dismantled by popping the clips on the periphery with a sharp tool, the rubber strip holding the buttons will have to be washed and the board wiped clean. If the buttons still don't work after that then the remote is dead, you will have to get another one.

if you have a disk inside that don wont to get out,..so,..start the computer and press the mouse button (the regular one), it will force the cd to be open