The dvd keeps popping back out

The pairing code is probably just "0000". Try it.

Check for a small hole on the front of the drive. Insert a straightened paper clip into the hold and push sharply. The door should slightly pop out - pull it open.

Adjust the resolution on your computer to one of the standard resolutions - 800 x 600, 1024 x 768, or the native resolution of the screen.

try cleaning all your connections for your speakers with isopropyl alcohol and a q-tip, if no luck it could be an internal problem

sounds like you have one for the wrong reigon. cheek with the manual, if you have one. you may be able to fix so it will play them.

You just remove batteries , unplug all cables, then put everything back together. This will reset the unit to factory settings.

The coby dvd 988 has 2 rca audio input jacks, you need to have these connected to your TV AUDIO OUT jacks, these are usually colored red and white like right and left stereo jacks, be sure to set up the TV for AUDIO output through these connections, some tv`s require that the internal built in speakers are cancelled and the audio output jacks are enabled. Set the coby input signal to receive the port you pluged the tv signal into.

I had one, lost it..and had to email coby a bunch of times and they sent me a pdf file to download....Ive noticed that the Coby help phone number is a joke most of the time..they put you on hold for over 20 min..then hang up on you...

hit it