I just purchased an 8 cup food processor (model FP 1600B) and the stem was broken on the stainless steel slicing and shredding disk (#77919). How do I get a replacement part?

If the shredding disk on your Cuisinart FP-12DC food processor is scraping against the cover and causing damage, it suggests that the disk is not properly seated or there may be an issue with the assembly. Here are some steps you can take to address the problem:
Check the assembly: Ensure that the stem adapter and shredding disk are properly aligned and securely attached to the food processor. The stem adapter should fit snugly into the center of the work bowl. Make sure the shredding disk is correctly placed on top of the stem adapter and clicks into place.
Inspect the cover: Examine the cover for any obstructions or misalignments that may be preventing the shredding disk from fitting properly. Clean the cover to remove any food particles or debris that may be causing interference.
Verify compatibility: Ensure that you are using the correct shredding disk for your specific model of food processor. Different models may have different sizes or types of disks. Refer to the user manual or contact Cuisinart's customer support to confirm that you have the right shredding disk for your FP-12DC model.
Adjust the disk height: Some food processors allow you to adjust the height of the slicing or shredding disk. Check if your model has an adjustment mechanism or a reversible disk with different heights. Follow the instructions in the user manual to adjust the disk height to the appropriate position.
Contact customer support: If you have followed these steps and the problem persists, it's recommended to reach out to Cuisinart's customer support for further assistance. They will have specific knowledge about your food processor model and can provide guidance or arrange for a repair if necessary.
Avoid using the food processor with a misaligned or damaged shredding disk, as it may affect the processor's performance or cause further damage.

https://www.smallappliance.com/product.asp?pid=14984&sid=18956&mid=8&gid=18970&prdCls=P&pfor=18073&******=Brand

https://www.ebay.com/itm/New-Cuisinart-Elite-12-Cup-Food-Processor-Part-Disc-Stem-Adapter-FP-12NSTM/132842363076?hash=item1eee0598c4:g:-Q0AAOSwztVb3Jts

https://www.ebay.com/itm/New-Cuisinart-Food-Processor-FP-12STM-DISK-STEM-PARTS-REPLACEMENT/132842349243?epid=1812902949&hash=item1eee0562bb:g:FbEAAOSwVH9b3JZW

http://www.pickeringappliances.ca/p-26717-adaptor-stem-fp12stm.aspx

go to a rubber products shop and get the rubbers or rubbers that will do the job

[PDF]Food Processor - Cuisinart

https://www.cuisinart.com/share/pdf/manuals/dlc-xp.pdf

CuisinartDough blade, metal chopping blade, 3 slicing discs, shredding disc, detachable stem... food processing technology plus the largest work bowl on the consumer ...

[PDF]Download Manual - Cuisinart

https://www.cuisinart.com/share/pdf/manuals/dlc-10s.pdf

Cuisinartwork bowl, cover and pusher ... The work bowl won't come off until the ..... DOUGH.BLADE. 12. The Pro Classic1" Food Processor can mix and knead dough in a.

[PDF]INSTRUCTION BOOKLET - Cuisinart

https://www.cuisinart.com/share/pdf/manuals/fp-12dc.pdf Cuisinart12-Cup Cuisinart Elite Collection® 2.0 Food Processor FP-12N Series. For your ...RECOMMENDED MAXIMUM WORK BOWL CAPACITIES ... dough blade, adjustable slicing disc, reversible ...... immediately after use so food won't dry on them ...

[PDF]Premier Series 7-Cup Food Processor DLC-2007N - Cui

Replacement parts for the Black & Decker FP1550 Food Processor may be ordered online from the following links:

http://www.partsourceplus.com/food-processors-fp1550-c-1_378_390.html

or

http://www.abtecparts.com/Black_&_Decker_food_processor_FP1510.htm

Trust this is helpful!

A manual for the FP-14C series which the Cuisinart site indicates is applicable to your specific model is available online:

http://www.cuisinart.ca/pdf/ibs/en/FP-14DCC_en.pdf

See page 8 for assembly instructions. Beginning on page 20 is an included recipe section.

For future reference available Parts & Accessories are listed here:

http://www.cuisinart.ca/cuisinart_parts_accessories.php?product_id=328&item_id=281&cat_id=7

Available replacement parts for Black & Decker FP1200 Quick N Easy 8 Cups Food Processor can be found here:

http://www.directpartsandproducts.com/food-processors-fp1200-c-1_378_413.html

or

http://www.abtecparts.com/Black_&_Decker_food_processor_fp1200.htm

Without careful use and care, there is a possibility that the disc stem can become fused with the motor shaft. If excess pressure is being applied to the slicing or shredding disc, this can cause immense friction and cause the plastic disc stem to "weld" onto the motor base itself.

I would suggest calling Kitchenaid Customer Service to see what options are available.

Their toll-free number is: 1-800-541-6390.

When you remove the regular chopper blade, it should fit on top of the stem. The chopper blade must be removed to use the slicer / shredder attachments.