I have a nokai 1100.may be 2 year old.automatically it is display CONTACT SERVICE an it can't switch on or off.i open out and make clean the circuits with a soft brush,not using any liquid.after that it works but the problem is it shut down frequently when i use.is it sofware problem and how can i solf the problem myself
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the cell phone service provider's network is not displayed, then the SIM card may not be making proper electrical contact in the phone. Remove the SIM card from the phone and clean the SIM card contacts with methylated spirits and the SIM card contact on the phone. Replace the SIM card and switch on your phone. Hope this fixes your phone.
if you are good at opening the handset then just open the handset and adjust the display the screen correctly bcoz it will be in loose contact as it fall it might have became loose or the display might have gone one you open the handset and adjust it will work ...
once you press the display screen after opening the panel near edges and in the middle with a little pressure ...
if the display is gone then you can get the new display screen and you can replace that by your self it is easy to do it ...
the display screen of the 1100 is very cheap so no problem if it is gone means ...
if you are not good at opening then just take your cell to the service center he will do it but he may take some service charge ..
i think you can do it ,it is not so much difficult task ..
hi your door has hooks which activate switches.one of the switches is called the monitor switch .the purpose of this switch is to close the mwave circuit[complete the circuit] indicating your mwave is safe for use.at present your mwave circuit is open therefore your functions arenot working .check if door hooks are making contact with the switch ,check if the swith is testing continuity.ihope ihave been of assistance let me know cheers