Web cam I can't see my image when I turned on my Web cam, and showing this remarks : sorry you don't have video capture hardware. Please help me.

Check the webcam setting's in the video software you are using to capture. There should be a setting to invert the image (Vertical invert). This is most probably what is wrong.

Software is here:

http://www.zebronics.net/downloads.asp

Unistall you old software first, reboot and then re-install.

First uninstall your web cam driver then install driver agagin then check .
If still it not works then your cam has some issue you need to repair it.

Does yours say, "Sorry, You have no video capture hardware?" -When you try to video?

goto mycomputer,right click select properties,hardare,device manager, right click image & scanners,right click uninstall, goto action menu, select scan for hardware chages.

wait and see... hope it will detect again and work good.

Copy this site and paste it in your browser ADDRESS

http://www.free-codecs.com/AMCap_download.htm

to download the Free AMCAP Video Capture Program.
AMCap v9.20
AMCap is a small yet fully functional video capture application compatible with Microsoft DirectShow. It is based on the sample AMCap from the Microsoft DirectX 9 SDK. AMCap supports still captures to BMP, JPEG and PNG formats and it remembers your Video Input, Video Standard and Video size settings from previous session. It has some nice features like multi-monitoring support, zooming, aspect ratio and interlacing features.
program.
AMCap is a small and effective piece of software and definitely worth trying.
Hope this will help. Bud

1st You download Webcam Driver.
I am not getting any image or video from my web cam.
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

You may need drivers for the Web Cam If you have these install them or if they have been installed install them again the reboot the computer and the drivers should install properly if that does not work when you reboot un plug the Web Cam then plug back in again

If you have a grey rectangle where ur cam should be. Especially after a fresh install plus all the drivers. although Then here's your solution :)

Go into device manager and delete the USB controller. Then reboot. When it says new hardware found let it automatically install it. Et voila, working cam :)

Complements of TruthSeeker 69

Hai,
I think u have a wrong setup for ur web cam.
Try set it up as a web cam and not as a video device.
Video device needs a capture card or a proper driver for the device to work.
Hope u got the idea
Rabby