- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your camera has problem in Lens mechanism. If Lens doesn't open properly, camera will not show picture at all. There would be Loading Motor section demaged in Lens mechanism and it needs to be replaced to work camera OK.
Now come to blue screen in playback mode, This model doesn't have internal memory, so you need memory stick/ card to see previously taken pictures.
apparently i have some bad news , its the lense which is misaligned or broken in terms of gears, the thing to do turn on the camera and make sure that lens is out and then LIGHTLY tapp on the lens the direction of which you feel that the lens is not equal legnth to the outer ring > place that looks uneven
your lens is possibly damaged or seriously out
of alignment - replacing lens is easier , than
opening the camera ( hard to believe how many
tiny screws etc . are in the way ) plus if you
do open it . . . ? few technicians will work on
it , after .
Same mechanism problem here on a DSC-W50. For me, it did not work out to PULL the lens, but to push them. I just opened the camera and it tried to calibrate the lens with no success for about 4 times, after it just let them out and displayed the "power off and on your camera" message. The problem is that on this model of camera when the lens is out you cannot push or pull it. So I thought of a trick: when the lens is moving, you can pull or push them. Anyway, this is what I did: with the lens out, i placed the camera with the lens towards a soft surface (bed) and gently pushed on the side with the display. First times it didn't work, so I had to push harder and finally it worked and now my lens is aligned and the camera is working as if it were new. I suggest you try to push or pull the lens while it is moving GENTLY at first, and if it does not work, try harder - really hard! It will do a click at some time and work fine!