My Epson Stylys DX4000 printer is not working after replacing the black cartridge Epson T0711 with genuine Epson T0711 cartridge. Message on appears that the wrong cartridge has been used to replace. The same message appeared after the replaced cartridge was chaged for new cartidge. What to do?

SOURCE: Empty ink cartridge message

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01457329&cc=us&lc=en&dlc=en&product=1153494

use this

SOURCE: My Epson NX 400 is giving me this error message:Error B88/69/68 C

Try to run the ink pad reset utility software.
Please log on to epson.com. The software runs on win xp and win vista.

SOURCE: Epson D92 replacement cartridge problem.

you can buy an epson chip resetter. i think they 7pin chips .try ebay about a fiver.it should reset the chips.the cart that is empty use your restetter on that and put that chip on the one that doesnt work.should be ok then.resetter led nornally goes green if chip is reset.ink level goes up to full.when carts show empty reset and you should be able to keep printing a few more pages.check chip contacts are clean no dirt etc.try resetter on non working cart light should go green.hope this helps

SOURCE: I replaced my black ink

try to clean the contacts on the printer where the rear of the cartridge sits in the electrical contacts clean with rubbing alcohol

Clive

• 4362 Answers
• Posted on Mar 01, 2010

SOURCE: When I put in new colour cartridge 41 into my

Hi ther


Click on the link to download it.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time