Camera not save the picture after click

When you click the cameras picture button most software these days will automatically save it to it's save folder, usually located in your documents.

HI,

Just uninstall the software without the camera plugged in and then install it again.Then plug in the camera.

Goodluck..

Hello there

From the start menu, left click on control menu (these are the steps for XP yours might be a little different). Then on the dialog box that pops up, left click on the "Printers and other Hardware" option.

Another dialog box will pop up. Left click on the scanners and cameras option to bring another dialog box up. From there double click with the left mouse key on the icon for your camera. This will bring up the "Scanner and Camera Wizard."

Left click the next key to get to the image capture screen, position the camera and left click on the word "Take Picture" below the image. The image will show up on the scrolling menu next to the image capture part of the box. Select it (left click the small box next to the image to get a check mark in the box) or use the select all option to get all pictures, then left click the next key.

Select the picture destination from the drop down menus that appear and hit the next key to save. The next dialog box will ask what is to be done with the pictures. Select the option in front of the correct choice and hit the next key to bring up the final screen.

From here the picture location will be able to be opened. Left click on finish if finished or select the other appropriate choice. The images should be on the computer and ready to work with.
If there is no scanner and camera wizard available try the next option(if you are using iphoto plus).

Open iPhoto Plus and left click on the file option. From the drop down menu, scroll down to acquire and select source. Left click on select source.

From the dialog box that pops up, select your particular camera by left clicking on the down arrow key and scroll downward until your camera is found. Select the camera from the list by left clicking on it and then left click the ok button. (If your camera is already selected, this step may be unnecessary).

Now left click on the file button again select acquire and then left click on image. From the box that comes up make sure the radial button--the round area before the options--before the word "image" has a dark circle in it indicating it is selected. Then left click on the acquire button.

A dialog box will appear that is titled "acquire pictures from video". Position the camera for what picture is desired then left click on the capture button.

The picture will appear in a drop down menu on the other side of the video feed. Scroll down if need be and select the picture or left click the "select all" button if you would like all of them and then left click get pictures.

Now all the pictures should appear in iPhoto Plus. Save them to your computer with the save option or edit them at your leisure.

Hi chinonsobeau,

First off, you to list the model number of your HP web Cam, as well as your OS, and the software you using to record your sound. I will assume that you have Quickplay which HP ususally send out with their web cams.

To access QuickPlay, just press the "blue QuickPlay button" next to the power button. If it doesn't load QuickPlay, just do "Start" - "All Programs" - then you will see QuickPlay listed there. If you still can't find it just do a search, you will find the short-cut. If you still don't find it, then HERE is a place you can download it and use it. It also has instruction on how to use it.

Or sometimes HP sends out Cheese, another camera software. You can download that HERE.

These are the instructions for QuickPlay:

Once launched QuickPlay, click on the 2nd icon from left (between DVD and TV icon), then double-click on "HP Pavilion WebCam" from the left side panel, then you will see the blue LED light lit and you should see yourself on the screen. (Double-click "yourself" to enlarge image)

To take a picture or record video, just press the corresponding buttons on the top. (the red circle icon is for recording video (press "Stop" icon to stop recording), the camera icon is for, well, camera)
Videos and pictures are saved at:
Pictures -- C:\Users\Public\Pictures\My Snapshots
Videos -- C:\Users\Public\Videos\HP Webcam


I'm less familiar with Cheese, so I'll give you their website HERE to go to their support and they can guide you through their program.

Anyway, I hope this helps,

Don't forget to leave a raing,

Thanks

Mark



To access QuickPlay, just press the "blue QuickPlay button" next to the power button. If it doesn't load QuickPlay, just do "Start" - "All Programs" - then you will see QuickPlay listed there. If you still can't find it just do a search, you will find the short-cut.

Once launched QuickPlay, click on the 2nd icon from left (between DVD and TV icon), then double-click on "HP Pavilion WebCam" from the left side panel, then you will see the blue LED light lit and you should see yourself on the screen. (Double-click "yourself" to enlarge image)

To take a picture or record video, just press the corresponding buttons on the top. (the red circle icon is for recording video (press "Stop" icon to stop recording), the camera icon is for, well, camera)
Videos and pictures are saved at:
Pictures -- C:\Users\Public\Pictures\My Snapshots
Videos -- C:\Users\Public\Videos\HP Webcam
To access QuickPlay, just press the "blue QuickPlay button" next to the power button. If it doesn't load QuickPlay, just do "Start" - "All Programs" - then you will see QuickPlay listed there. If you still can't find it just do a search, you will find the short-cut.

Once launched QuickPlay, click on the 2nd icon from left (between DVD and TV icon), then double-click on "HP Pavilion WebCam" from the left side panel, then you will see the blue LED light lit and you should see yourself on the screen. (Double-click "yourself" to enlarge image)

To take a picture or record video, just press the corresponding buttons on the top. (the red circle icon is for recording video (press "Stop" icon to stop recording), the camera icon is for, well, camera)
Videos and pictures are saved at:
Pictures -- C:\Users\Public\Pictures\My Snapshots
Videos -- C:\Users\Public\Videos\HP Webcam

1. Step 1 Make sure your Web cam is hooked up to the USB port on the back of the computer and installed appropriately and the computer is on and ready.
   
2. Step 2 From the start menu, left click on control menu (these are the steps for XP yours might be a little different). Then on the dialog box that pops up, left click on the "Printers and other Hardware" option.
   (If you don't have XP but have iPhoto Plus, skip to step 7.
   
3. Step 3 Another dialog box will pop up. Left click on the scanners and cameras option to bring another dialog box up. From there double click with the left mouse key on the icon for your camera. This will bring up the "Scanner and Camera Wizard."
   
4. Step 4 Left click the next key to get to the image capture screen, position the camera and left click on the word "Take Picture" below the image. The image will show up on the scrolling menu next to the image capture part of the box. Select it (left click the small box next to the image to get a check mark in the box) or use the select all option to get all pictures, then left click the next key.
   
5. Step 5 Select the picture destination from the drop down menus that appear and hit the next key to save. The next dialog box will ask what is to be done with the pictures. Select the option in front of the correct choice and hit the next key to bring up the final screen.
   
6. Step 6 From here the picture location will be able to be opened. Left click on finish if finished or select the other appropriate choice. The images should be on the computer and ready to work with.
   If there is no scanner and camera wizard available try the next option.
   
7. Step 7 Open iPhoto Plus and left click on the file option. From the drop down menu, scroll down to acquire and select source. Left click on select source.
   
8. Step 8 From the dialog box that pops up, select your particular camera by left clicking on the down arrow key and scroll downward until your camera is found. Select the camera from the list by left clicking on it and then left click the ok button. (If your camera is already selected, this step may be unnecessary).
   
9. Step 9 Now left click on the file button again select acquire and then left click on image. From the box that comes up make sure the radial button--the round area before the options--before the word "image" has a dark circle in it indicating it is selected. Then left click on the acquire button. (Read tips for other options).
   
10. Step 10 A dialog box will appear that is titled "acquire pictures from video". Position the camera for what picture is desired then left click on the capture button.
    
11. Step 11 The picture will appear in a drop down menu on the other side of the video feed. Scroll down if need be and select the picture or left click the "select all" button if you would like all of them and then left click get pictures.
    
12. Step 12 Now all the pictures should appear in iPhoto Plus. Save them to your computer with the save option or edit them at your leisure. Not sure if this helps but this is the way I take pics with my webcam. You can also see if there's a button on top of you webcam...Hope this helped any!
    

The procedure to transfer pictures to a Computer depends on whether or not the Camera has the capability of using Picture Transfer Protocol (PTP). If the Camera is capable of PTP (in this case; DSC-S730 - YES), set the USB mode in the Camera menu to PTP and then use the PTP procedure to copy the pictures to the computer. Otherwise, use one of the standard USB transfer procedures.

This procedure must be performed while logged in as Administrator or to an account with Administrator rights:

1. Turn on the Computer.
2. Turn on the Camera.
3. Insert the recording media containing the pictures into the Camera.
4. Set the USB connection or Transfer mode setting in the Camera menu to PTP .
5. Use the USB cable supplied with the Camera to connect the Camera to the Computer. NOTE: Connection through a USB hub or other USB device --such as a printer or keyboard-- is not supported and cannot be guaranteed. The Camera should be connected directly to a USB port on the Computer.
   NOTE: The Scanner and Camera Wizard should automatically start.
   
6. In the Scanner and Camera Wizard window, click the Next button.
7. Under Choose Pictures to Copy , do one of the following:
   • Click to select each picture you want to copy.
   • Click Select All to select all the pictures for copying.
   NOTE: Selected images will be marked with a green check mark.
   
8. Click the Next button.
9. Under Picture Name and Destination , in the Type a name for this group of pictures field, enter a name for the folder where the pictures will be saved.
10. Next to the Choose a place to save this group of pictures field, click the Browse button.
11. In the Browse for Folder window, click to select the location on the computer where you want to save the pictures.
12. Click the OK button.
13. In the Scanner and Camera Wizard window, click the Next button. NOTE: The pictures are copied to the Computer.
    
14. After the transfer process it finished, under Other Options , click to select Nothing, I'm finished working with these pictures .
15. Click the Next button.
16. Click the Finish button.

If you are still unable to transfer pictures, please switch the USB mode of the Camera to Normal or Mass Storage and try again.
After following the steps above, the pictures from the camera should successfully be copied to the computer. If for some reason the pictures did not copy, try using the method for standard USB picture transfer.

I'm assuming you are using the Windows XP Operating System in the Computer. If not then follow this link:


http://www.kb.sony.com/selfservice/documentLink.do?externalId=C116935


Good Luck!!!!!!!!!!!!!!!!!!!!!!!

Normal 0 Also send this to your family and friends so they have there computer setup properly. Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

Hope this helps. Bud

have to reflash the phone so try online at topsony.com or take the phone to a mobile service center and have them reflash the phone for you.