D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point Logo

Question about D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point

1 Answer

I cant istall dlink dwl 2100 acess point.prescribed site is not opening

Posted by kumar_baddel on

  • Anonymous Feb 23, 2009

    NO INSTALATION CD

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Be sure to check every point on this TIP
to connect to "prescribed site" (I assume the default router IP address 192.168.0.1) you must be on same subnet and connect using a cable to router.
Consult Quick install Guide
or follow user manual Page !0 instructions:
First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box.
Open your web browser program such as Internet Explorer. Type the IP address of the DWL-2100AP in the address field (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-2100AP and your computer are in the same subnet.


If you need help in the matter let me know and I'll send you instructions

Posted on Jan 26, 2009

  • Anonymous Jan 26, 2009

    Generally speaking "same subnet" means:
    From QIG page 2:
    You will need to assign your computer a Static IP address within the same range as the DWL-2100AP’s IP address for the purpose of configuring the DWL-2100AP. See the Appendix if you need assistance in assigning a Static IP address for your network adapter.
    ---------
    To assign a Static IP Address to the laptop or computer that you are using to configure the DWL-2100AP, please do the following in Windows®
    Go to Start > Double-click Control Panel > Double-click Network Connections > Right-click on Local Area Connections > Click Properties
    Highlight Internet Protocol (TCP/IP)
    Click Properties
    Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window
    Click OK
    Input your IP address and subnet mask. (The IP Address must be within the same range as the DWL-2100AP. The IP Address of the DWL-2100AP is 192.168.0.50. You can assign 192.168.0.51 for your computer. No two computers can have the same IP Address. Assign a subnet mask of 255.255.255.0

    Of course only administrator can perform these control panel changes.


×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer
0helpful
1answer

Is there any limit for wireless D-link DWL-2100 AP ?

D-Link AirPlus Xtreme G DWL-2100AP Wireless Access Point provides speed upto 108Mbps, which is the maximum wireless signal rate derived from IEEE Standard 802.11g specifications. However, the actual speed depends upon the wireless network environment, setup and devices.

For further details please refer to DLink Official Product Description
0helpful
1answer

DWL-2100 AP will not reset to factory defaults with reset push. Ideas?

Here are the steps to reset the access point from D-Link's website:
Please visit http://support.dlink.com/faq/view.asp?prod_id=1600 for complete FAQ and screen shot.

The following reset procedure will completely restore the default settings on the access point including your password.

Step 1 Locate the reset pinhole on the back of the unit.

Step 2 With the access point powered on, press and hold the Reset button.

Step 3 Hold the Reset button for about 10 seconds.

Step 4 Release the Reset button.

Step 5 The device is now at factory defaults.

You can find the complete manual for your wireless access point here:
http://support.dlink.com/products/view.asp?productid=DWL-2100AP
7helpful
3answers

D-link dwl-2100ap in WDS mode Received Deauth: WLAN 1 11G STA

I have had similar problems with DWL-2100 and (much less often) with DWL-3200. I have no solution, but a workaround: changing the authentication mode. For example, if the units are using WPA-Personal, I change it (on both) to WPA2-Personal or WPA-Auto-Personal. It doesn't seem to matter which mode is used, it's just the fact of changing it that helps (eventually). You may have to go through the process more than once. Also, realize that although the web interface comes up 30 seconds or so after a reboot, it may take another 30-60 seconds before a link is established, so don't give up too soon while trying these changes.
1helpful
2answers

I need help on how to use setup wizard

hat type of connection do you have? if you connect everything and put 192.168.0.1 in the address field in the browser you will be taken to the dlink router setup page. the default username is admin and the password is admin. from there you should see a setup link.
18helpful
4answers

Download driver

Please paste the following link into your browser's address bar and run the setup after unzipping the file downloaded and watch how all your problems vanish!

ftp://ftp.dlink.co.uk/wireless/dwl-g630/DWL-G630_driver_v5.11.zip
1helpful
1answer

Can a dlink dwl g710 range extender work like an acess point

hi, i think there is no chance to make an AP from range extender because it is ONLY RANGE EXTENDER so you need another device to work as AP.
0helpful
1answer

Enquiry

repeater, as in a link up for wireless node to node communications?

hmmm...www.dlink.com

check your computer's warranty here FREE
Not finding what you are looking for?

353 views

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Mike

Level 3 Expert

4383 Answers

Donivan Wise

Level 2 Expert

254 Answers

Mehandi Husain ...

Level 3 Expert

1654 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...