Sony AW-Q170A-B2 DVD RW Dual Layer Burner Logo

Related Topics:

Question about Sony AW-Q170A-B2 DVD RW Dual Layer Burner

2 Answers

Please help This product didnt show up as a new hardware

Posted by Anonymous on

2 Answers

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 624 Answers

Also if that doesn?t work check the system BIOS master and slave drive settings on both IDE channels. Make sure the one your drive is connected to is set to on or auto detect otherwise Windows won?t see the drive. Some assemblers turn the unused parts off to speed the boot process.

Posted on Jul 12, 2007

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

Make sure that when you fitted the drive that the plastic jumper cap on the back of the writer was set to master if used on it's own IDE cable, or set as slave if it is sharing and IDE cable with another drive, you will find the master and slave positions either underneath the unit or above the jumpers at the back.

Posted on Jul 11, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a gigabyte ga-945gcmx-s2 and its giving me problems like freezing while detecting new hardware,showing blank screen after the beep and beeps going on.Can someone please help me with this problem

This sounds like a problem with your new Graphics card. (This is just an assumption.) When the Os loads a new graphics driver it can cause a slow down and screen flashing. It is better to download the correct (most up to date) driver for your new hardware before you attempt to install drivers from the Hardware Detection Wizard. These aren't always the most appropriate drivers. Enter this site into your browser for the correct Drivers for your Motherboard.
http://ee.gigabyte.com/products/page/mb/ga-945gcmx-s2_66/download/

Hope this helps. Good luck ,and if this doesn't help contact me again.
1helpful
1answer

My printer will not print...it's saying it's not installed but showing that it is...has worked fine for a year or so but now won't print...I have unistalled and reinstalled the software but it's still the...

Go to Control Pannel and Add remove Programs
and
Uninstall the HP Photosmart 8250 Inkjet Printer Drivers
or
Click start - control pannel - System - Hardware - Device manager - Select the Printer (+) and uninstall the Drivers

then Check by connecting the USB Cable to the Computer without installing the drivers

IF its NOT SHOWING " Found New Hardware Message " - then Please make sure the Printer is on / check replacing the USB Cable - the install the Drivers

If it should show the Found New Hardware Message - then we can deside to install the drivers for the Product

Then download the Updated drivers from HP Photosmart 8250

if above link don't work then
chek : http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=443024&lc=en&cc=us&dlc=en&lang=en&cc=us

According to the Operating System ..





1helpful
4answers

The buttons on my iphone wont work.

it seems that your phone is hanged. Try connecting the phone to the Itunes and try restoring it.
0helpful
1answer
0helpful
1answer
0helpful
1answer

Acer aspire 3680 "unmountable_boot_volume" (please help!!)

Contact Acer and they can send you the disk that came with that computer. Then you can run some commands. Let me know when you get the disk.

Have you tried safe mode by hitting the f8 key at start up?
0helpful
4answers

Connect to pc

Sounds like the system files have been corrupted or deleted.

The HDD6330 is only compatible with Windows XP (With Service Pack 2) & Windows Media Player 10. If you have version 11, you will need to uninstall it to roll back to version 10.

Install and run the Philips Device Manager from the product CD.

Connect the player to the power supply and PC.

If the player is recognised by the PC, select the repair/restore option in Philips Device Manager, and follow the on-screen prompts.
This will format the player and re-load the firmware.

NOTE: THIS WILL DELETE ALL TRACKS ON THE PLAYER.

If this doesn't help, then post details of what happens, and I'll try to help further.
0helpful
1answer

No cd came with the camera

yes, download the software and drivers here that you'd like
http://www.fujifilm.com/products/digital/download/index.html

and please rate if I helped, or reply for more if I didnt! NGK
Not finding what you are looking for?

Open Questions:

See all Sony AW-Q170A-B2 DVD RW Dual Layer Burner Questions

68 views

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Steve Nordquist
Steve Nordquist

Level 3 Expert

982 Answers

Cindy Wells

Level 3 Expert

6648 Answers

Marvin
Marvin

Level 3 Expert

85242 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...