When I turn the motorola razor on, the screen stays dark

Moto RAZR phones are notorious for this. Best thing to do - Get a new phone. Inside of the hinge, there is a sensor that detects if the phone is open or shut. When you open the phone, it still thinks its closed, so the screen stays white, and if im correct the outside display should still work. Pretty much not-fixable unless you know someone who can take it apart and re-position the sensor (will void the warranty)

Best thing to do....Upgrade.

My Motorola Razor cellphone all of a sudden went blank, i took out the battery and put it back in and turned it on, but the keyboard just flashes and the screen stays blank, what do i do?

chang the lcd setrip and chek the lcd.

You have a couple of options:
Take it to a motorola repairer or try to update the firmware on your phone. As you cant get it to go past the Hellomoto screen a hard reset would not possible.

Hate to say it, but your phone is on the way to its death. I've had two RAZRs die on me, and both showed similar symptoms before they went down. It's a combination of the ribbon wire that connects the screen to the keypad half of the phone (causing the power problems) and the open/close sensor on the phone not realizing you've shut the phone (which is why it's keeping the T up on the screen). If you have warranty coverage on it, move all your contacts to your SIM card, send any pics you want to keep to your email address with mms messages, and then go show them the problems. They should give you a new phone.

I also dropped my phone but it was fine for two days, than my phone had just shut off and when I tried to turn it back on I could hear it but my screen stayed black. I reformatted twice and it came back on. To reformat press and hold *, 3 and the green button. I had to do this twice before it work! Hope this will help you too!

HAS IT BEEN WET? IF SO OPEN BATTERY DOOR AND REMOVE BATTERY THEN POUR RUBING ALCOHOL NOTE MUCH THEN VACUME NOW PLACE IT UNDER POWERFUL FAN OVER NITE.TRUST ME IT WORK'S...

kkayy - replace the LCD or the flecable on your phone.

flauta - deri - replace the LCD

the easiest thing tpo do here is take it to a professional but if you want to try updating your software off the Motorola website. (this require a data cable or bluetooth in your computer) This fixes a lot of software problems with the razor. If this doesn't work then you will have to reflash your Firmware which is like the Windows Xp of the phone. This does require a professional as it can destroy the phone

ok frozen like the screen stays on and won't turn off or the phone won't turn on at all.