Error Code 5 on Krups Expressario EA 8010 - Krups XP4030 Espresso Machine

https://33coffeemakers.com/krups-coffee-maker-error-codes/

Error code 5 is a result of one of the following:

Blocked water circuit (water meter, pump, distributor, distributor motor, microswitch)

You can get error codes here:
https://33coffeemakers.com/krups-coffee-maker-error-codes/

Some has already solved that issue here:
https://www.fixya.com/support/t24997792-krups_error_code_01

Error 12 There was no pulse from the ejection switch so possibly a switch problem or worse still some grief on the control PCB. This will also be associated with the cleaning the drawer problem. From memory the switch/es are located above the used grounds bin.

Not enough grounds going in to make the cake of coffee the correct height for brewing or the switch that detects the cake height is faulty.

I have ea8250 krups machine . It gives me error code 05

Good afternoon... On my krups machine and failure code appeared 8025 09. Said It was the temperature probe. I'd like to get a picture of the temperature probe and its cost. With the best regards
Joao Araujo

Error code 9 is temperature detected as too high or too low. Check NTC on boiler

NTC fault (component, bonding, connector, wires...)
Coffee leakage on NTC (resistor value)

Error code 05 on my krups ea 8260. How to fix it?

You may want to try to locate an owners manual on the internet. Try the Krups website via Google.