Philips Home Theatre System - no sound or power light on sub woof

DVD sledges work by a rubber belt that in your case might have broke or come off. It's very easy to replace. Find the original belt. Measure the diameter in MM (approx) and do a Google search for "Drive belt XX MM".
Get the nearest to your size.

What exactly is the issue? no deep bass? pffft instead of woof?! low volume?

Info needed,

Upgrade again with the HTS turned on.

did ya plug in those three colored plugs

Peak music power output

some devices these days have a built in volume control, try using your remote for which ever dvd player or satalite bix you use, on push the volume up button on it while you have the volume on the tv maxed out so that you will be able to tell a defference if it works or not.

just open the box. check fuses inside.

Thanks dude,

Not sure which trick worked, but i did ur classic 7,3,4,4,6,6,0 trick, got no message from the player. So i did pressed 0000 after that. Still no message appeared. But when i pressed start....it worked!!!!!!

Thanks a ton!!!!!!!!!!!!!!!!!!!!!!!!!!!!! God Bless...

The USB port is only compatible with flash memory drives and some card readers.

I would suggest that you smash
Philips HTS w/a hammer!
I had better sound from TV alone! Only 2 speakers put out sound from TV. Recordings from DVR can not be heard very well w/all volumes at max. System sucks! You get what you pay for! $2500 LCD TV sounds worse w/Philips HTS than my son's $300 TV! ALL cables hooked up as instucted!!!!